Waveguide confined Raman spectroscopy for microfluidic interrogation

Abstract

We report the first implementation of the fiber based microfluidic Raman spectroscopic detection scheme, which can be scaled down to micrometre dimensions, allowing it to be combined with other microfluidic functional devices. This novel Raman spectroscopic detection scheme, which we termed as Waveguide Confined Raman Spectroscopy (WCRS), is achieved through embedding fibers on-chip in a geometry that confines the Raman excitation and collection region which ensures maximum Raman signal collection. This results in a microfluidic chip with completely alignment-free Raman spectroscopic detection scheme, which does not give any background from the substrate of the chip. These features allow a WCRS based microfluidic chip to be fabricated in polydimethylsiloxane (PDMS) which is a relatively cheap material but has inherent Raman signatures in fingerprint region. The effects of length, collection angle, and fiber core size on the collection efficiency and fluorescence background of WCRS were investigated. The ability of the device to predict the concentration was studied using urea as a model analyte. A major advantage of WCRS is its scalability that allows it to be combined with many existing microfluidic functional devices. The applicability of WCRS is demonstrated through two microfluidic applications: reaction monitoring in a microreactor and detection of analyte in a microdroplet based microfluidic system. The WCRS approach may lead to wider use of Raman spectroscopy based detection in microfluidics, and the development of portable, alignment-free microfluidic devices.

A nanoporous optofluidic microsystem for highly sensitive and repeatable surface enhanced Raman spectroscopy detection

“…2(d)). Different angles between the two fiber optic cables (from 0 to 180 ) were investigated using various device designs to optimize the collection of Raman photons; 90 proved to be the most efficient angle, which is in agreement with a previous report by Ashok et al 30 As illustrated in Fig. 2(d), excitation and collection fiber optics were connected, respectively, to the 785 nm diode laser and the Raman spectrometer (iHR550 Horiba JY).…”

Fiber-Based, Injection-Molded Optofluidic Systems: Improvements in Assembly and Applications

“…We chose Raman spectroscopy due to its known capabilities for liquid identification and measurement of analyte concentration [8]. Previous miniaturized Raman systems based on PDMS microfluidic chips and embedded optical fibers [25] required hundreds of milliwatts of input laser power. In contrast, our system uses laser powers that were a factor of 10 lower.…”

Fluorescence suppression using wavelength modulated Raman spectroscopy in fiber-probe-based tissue analysis

“…13 For a fair comparison between the SNR of standard and modulated Raman, SNR from the first differential of the standard Raman spectrum was also estimated. Signal to background (S/B) of a Raman peak was estimated as the ratio of the height of the Raman peak from the fluorescence background to the height of the fluorescence background, 28 after subtracting the dark current of the CCD from the recorded spectrum.…”