Although the values of different parameters may remain within permissible limits during the operation of a thermoluminescent dosemeter (TLD) reader, certain effects can become apparent only when a long-term followup of these parameters is performed. In order to ensure an accurate and reliable operation of a TLD reader, the system characteristics must be monitored continuously. Long-term statistical checks of key system parameters may give a broader insight into the operational characteristics of the TLD reader and may help for proper maintenance of the system. The photomultipliers noise, the internal reference light source stability and the A to D reference voltage were found to be critical parameters, which have a major influence on the accuracy and stability of the system. A followup of these parameters for a period of about 10 y is presented, and some problems are seen to be reflected in the distributions.

No abstract

Second readouts and the photo-transferred thermoluminscence (PTTL) method are sometimes used to reassess high doses. When using the common LiF:Mg,Ti, if the second readout is performed by a regular readout cycle of 13.3 s, its efficiency is low and the estimations cannot be obtained with acceptable accuracy for low doses in the 10-100 mSv range. By applying the PTTL method, the efficiency is much higher, but a high background is also present, deteriorating the quality of the reassessment. A simple and efficient method was studied, which consists of expanding the heating time to 30 s. Although the efficiency relative to a standard readout is improved by only a factor of 3, the low background enables to obtain results with the same uncertainty as the more complicated PTTL method. By applying region of integration discrimination, the errors can be further diminished.

No abstract

No abstract