No abstract

In this work, we fabricated and characterized bioactive 3D glass-ceramic scaffolds with inherent antibacterial properties. The sol-gel (solution-gelation) technique and the sacrificial template method were applied for the fabrication of 3D highly porous scaffolds in the 58.6SiO 2 - 24.9CaO - 7.2P 2 O 5 - 4.2Al 2 O 3 – 1.5Na 2 O −1.5K 2 O – 2.1Ag 2 O system (Ag-BG). This system is known for its advanced bioactive and antibacterial properties. The fabrication of 3D scaffolds has potential applications that impact tissue engineering. The study of the developed scaffolds from macro-characteristics to nano-, revealed a strong correlation between the macroscale properties such as antibacterial action, bioactivity with the microstructural characteristics such as elemental analysis, crystallinity. Elemental homogeneity, morphological, and microstructural characteristics of the scaffolds were studied by scanning electron microscopy associated with energy dispersive spectroscopy (SEM-EDS), transmittance electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and UV-visible spectroscopy methods. The compressive strength of the 3D scaffolds was measured within the range of values for glass-ceramic scaffolds with similar compositions, porosity, and pore size. The capability of the scaffolds to form an apatite-like phase was tested by immersing the scaffolds in simulated body fluid (SBF) and the antibacterial response against methicillin-resistant Staphylococcus aureus (MRSA) was studied. The formation of an apatite phase was observed after two weeks of immersion in SBF and the anti-MRSA effect occurs after both direct and indirect exposure.

Cellulose recalcitrance is one of the major barriers in converting renewable biomass to biofuels or useful chemicals. A pretreatment reactor that forms a dielectric barrier discharge plasma at the gas-liquid interface of the microbubbles has been developed and tested to pretreat α-cellulose. Modulation of the plasma discharge provided control over the mixture of species generated, and the reactive oxygen species (mainly ozone) were found to be more effective in breaking-up the cellulose structure compared to that of the reactive nitrogen species. The effectiveness of pretreatment under different conditions was determined by measuring both the solubility of treated samples in sodium hydroxide and conversion of cellulose to glucose via enzymatic hydrolysis. Solutions pretreated under pH 3 buffer solutions achieved the best result raising the solubility from 17% to 70% and improving the glucose conversion from 24% to 51%. Under the best conditions, plasma-microbubble treatment caused pronounced crevices on the cellulose surface enhancing access to the reactive species for further breakdown of the structure and to enzymes for saccharification.

No abstract

No abstract