Poly(ethylene terephthalate) was depolymerised under supercritical ethanol, 98 wt% of diethylterephthalate was obtained after 45 min, by adding [Bmim][BF4] as catalyst.

Polymer film based on pH-dependent Eudragit FS 30 D acrylic polymer in association with arabinoxylane, a polysaccharide issued from gum psyllium, was produced by way of solvent casting. Physical-chemical characterization of the polymer film samples was performed by means of thermogravimetry (TGA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). Furthermore, water-equilibrium swelling index (I(s)) and weight loss of the films in KCl buffer solution of pH 1.2, in KH(2)PO(4) buffer solution of pH 5.0, or in KH(2)PO(4) buffer solution of pH 5.0 consisting of 4% enzyme Pectinex 3X-L (w/v) were also carried out for the film characterization. No chemical interactions between the Eudragit FS 30 D and the arabinoxylane polymer chains were evidenced, thus suggesting that the film-forming polymer structure was obtained from a physical mixture of both polymers. The arabinoxylane-loader films showed a more pronounced weight loss after their immersion in buffer solution containing enzyme Pectinex 3X-L. The introduction of the arabinoxylane makes the film more susceptible to undergo an enzymatic degradation. This meant that the enzyme-dependent propriety issued from the arabinoxylane has been imprinted into the film formulation. This type of polymer film is an interesting system for applications in colon-specific drug delivery system.

Virgin polystyrene (PS) composites were reinforced with medium density fiberboard (MDF) residue, considering the influence of fiber content. The composites were evaluated for their morphology, identification of functional groups and thermal behavior. Mechanical tests and a degradation study under ultraviolet radiation (UV) were also performed. The results showed that the best properties were obtained for composites with 4% by mass of MDF waste. The addition of residue was found to increase thermal stability of polystyrene compared to its pure form. The morphology of the composites showed homogeneity of the material. In the degradation tests under ultraviolet (UV) radiation, it was found that the presence of MDF residue slows down the matrix degradation process when evaluated by means of tensile strength. Polystyrene composites reinforced with MDF residues showed good mechanical properties and can be applied in the development of materials that do not need a good appearance.

Preparo e caracterização de filmes automontados da ftalocianina de cobre sulfonadaPreparation and characterization of Layer-by-Layer films of sulfonated copper phthalocyanine