Imaging buried objects embedded within electrically large investigation domains can require a large number of measurement points. This is impractical if long data acquisition time cannot be tolerated or the system is conceived to work at some stand-off distance from the air/soil interface; for example, if it is mounted over some flying platform. In order to reduce the number of spatial measurements, here, we propose a method for detecting and localizing shallowly buried scattering targets from under-sampled far-field data. The method is based on a scattering model derived from the equivalence theorem for electromagnetic radiation. It exploits multi-frequency data and does not require that the transmitter and receivers are synchronized, making the source non-cooperative. To provide a benchmark against which spatial data have to be reduced, first, the number of required spatial measurements is examined by analyzing the properties of the relevant scattering operator. Then, since under-sampling data produces aliasing artifacts, frequency diversity (i.e., multi-frequency data) is exploited to mitigate those artifacts. In particular, single-frequency reconstructions are properly fused and a criterion for selecting the frequencies to be used is provided. Numerical examples show that the method allows for satisfactory target transverse localization with a number of measurements that are much less than the ones required by other methods commonly used in subsurface imaging.
This Letter introduces a feasibility study of a scanning system for applications in biomedical bone imaging operating in the microwave range 0.5–4 GHz. Mechanical uncertainties and data acquisition time are minimised by using a fully automated scanner that controls two antipodal Vivaldi antennas. Accurate antenna positioning and synchronisation with data acquisition enables a rigorous proof-of-concept for the microwave imaging procedure of a multi-layer phantom including skin, fat, muscle and bone tissues. The presence of a suitable coupling medium enables antenna miniaturisation and mitigates the impedance mismatch between antennas and phantom. The three-dimensional image of tibia and fibula is successfully reconstructed by scanning the multi-layer phantom due to the distinctive dielectric contrast between target and surrounding tissues. These results show the viability of a microwave bone imaging technology which is low cost, portable, non-ionising, and does not require specially trained personnel. In fact, as no a-priori characterisation of the antenna is required, the image formation procedure is very conveniently simplified.
The knowledge of the electromagnetic constitutive properties of materials is crucial in many applications. Free-space methods are widely used for this purpose, despite their inherent practical difficulties. This paper describes an affordable free-space experimental setup for the characterization of flat samples in 1–6 GHz in a non-anechoic environment. The extracted properties are obtained from the calibrated Scattering Parameters, using a frequency-by-frequency solution or a multi-frequency reconstruction. For the first, we describe how the Time-Domain Gating can be implemented and used for filtering the signals. For the latter, a weighting factor is introduced to balance the reflection and transmission data, allowing one to have a more favorable configuration. The different role of transmission and reflection measurements on the achievable results is analyzed with regard to experimental uncertainties and different noise scenarios. Results from the two strategies are analyzed and compared. Good agreement between simulation, measurement and literature is obtained. According to the reported results for dielectric materials, there is no need of filtering the data by a Time-Domain Gating in case of the multi-frequency approach. Experimental results for Polymethylmethacrylate (PMMA) and Polytetrafluorethylene (PTFE) samples validate both the setup and the processing.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.