Na2Ti3O7 is considered a promising negative electrode for Na-ion batteries; however, poor capacity retention has been reported and the stability of the solid-electrolyte interphase (SEI) could be one of the main actors of this underperformance. The composition and evolution of the SEI in Na2Ti3O7 electrodes is hereby studied by means of X-ray photoelectron spectroscopy (XPS). To overcome typical XPS limitations in the photoelectron energy assignments, the analysis of the Auger parameter is here proposed for the first time in battery materials characterization. We have found that the electrode/electrolyte interface formed upon discharge, mostly composed by carbonates and semicarbonates (Na2CO3, NaCO3R), fluorides (NaF), chlorides (NaCl) and poly(ethylene oxide)s, is unstable upon electrochemical cycling. Additionally, solid state nuclear magnetic resonance (NMR) studies prove the reaction of the polyvinylidene difluoride (PVdF) binder with sodium. The powerful approach used in this work, namely Auger parameter study, enables us to correctly determine the composition of the electrode surface layer without any interference from surface charging or absolute binding energy calibration effects. As a result, the suitability for Na-ion batteries of binders and electrolytes widely used for Li-ion batteries is questioned here.

Carbodiimides for batteries: the family of transition-metal carbodiimides MNCN (M = Cu, Zn, Mn, Fe, Co, and Ni) are shown to be new electrochemically active materials through displacement reactions both for lithium and sodium ion batteries.

No abstract

No abstract

H2Ti3O7 was prepared as a single phase material by ionic exchange from Na2Ti3O7. The complete ionic exchange was confirmed by (1)H and (23)Na solid state Nuclear Magnetic Resonance (NMR). The atomic positions of H2Ti3O7 were obtained from the Rietveld refinement of powder X-ray diffraction (PXRD) and neutron diffraction experimental data, the latter collected at two different wavelengths to precisely determine the hydrogen atomic positions in the structure. All H(+) cations are hydrogen bonded to two adjacent [Ti3O7](2-) layers leading to the gliding of the layers and lattice centring with respect to the parent Na2Ti3O7. In contrast with a previous report where protons were located in two different positions of H2Ti3O7, 3 types of proton positions were found. Two of the three types of proton are bonded to the only oxygen linked to a single titanium atom forming an H-O-H angle close to that of the water molecule. H2Ti3O7 is able to electrochemically insert Na(+). The electrochemical insertion of sodium into H2Ti3O7 starts with a solid solution regime of the C-centred phase. Then, between 0.6 and 1.2 inserted Na(+) the reaction proceeds through a two phase reaction and a plateau at 1.3 V vs. Na(+)/Na is observed in the voltage-composition curve. The second phase resembles the primitive Na2Ti3O7 cell as detected by in situ PXRD. Upon oxidation, from 0.9 to 2.2 V, the PXRD pattern remains mostly unchanged probably due to H(+) removal instead of Na(+), with the capacity quickly fading upon cycling. Conditioning H2Ti3O7 for two cycles at 0.9-2.2 V before cycling in the 0.05-1.6 V range yields similar specific capacity and better retention than the original Na2Ti3O7 in the same voltage range.