We present models for the optical functions of 11 metals used as mirrors and contacts in optoelectronic and optical devices: noble metals (Ag, Au, Cu), aluminum, beryllium, and transition metals (Cr, Ni, Pd, Pt, Ti, W). We used two simple phenomenological models, the Lorentz-Drude (LD) and the Brendel-Bormann (BB), to interpret both the free-electron and the interband parts of the dielectric response of metals in a wide spectral range from 0.1 to 6 eV. Our results show that the BB model was needed to describe appropriately the interband absorption in noble metals, while for Al, Be, and the transition metals both models exhibit good agreement with the experimental data. A comparison with measurements on surface normal structures confirmed that the reflectance and the phase change on reflection from semiconductor-metal interfaces (including the case of metallic multilayers) can be accurately described by use of the proposed models for the optical functions of metallic films and the matrix method for multilayer calculations.
Optical and electron-energy-loss data for evaporated-aluminum films have been critically analyzed and used in an iterative, self-consistent algorithm that represents a combination of the Kramers-Kronig analysis and the semiquantum-model application. The novel values of the intrinsic optical functions of aluminum have been determined in a wide spectral range from 200 µm (6.2 meV) to 0.12 nm (10 keV). These functions are in accordance with recent calculations by Lee and Chang [Phys. Rev. B 49, 2362 (1994)], with dc conductivity measurements, and are in good agreement with both peak positions and line widths obtained from electron-energy-loss experiments. The results are examined for internal consistency by inertial and f-sum rules.
Abstract:The terahertz (THz) frequency quantum cascade laser (QCL) is a compact source of high-power radiation with a narrow intrinsic linewidth. As such, THz QCLs are extremely promising sources for applications including high-resolution spectroscopy, heterodyne detection, and coherent imaging. We exploit the remarkable phase-stability of THz QCLs to create a coherent swept-frequency delayed self-homodyning method for both imaging and materials analysis, using laser feedback interferometry. Using our scheme we obtain amplitude-like and phase-like images with minimal signal processing. We determine the physical relationship between the operating parameters of the laser under feedback and the complex refractive index of the target and demonstrate that this coherent detection method enables extraction of complex refractive indices with high accuracy. This establishes an ultimately compact and easy-to-implement THz imaging and materials analysis system, in which the local oscillator, mixer, and detector are all combined into a single laser. References and links 1. B. Hu and M. Nuss, "Imaging with terahertz waves," Opt. Lett. 20, 1716Lett. 20, -1718Lett. 20, (1995 36, 2587-2589 (2011). 29. S. Donati, "Developing self-mixing interferometry for instrumentation and measurements," Laser Photon. Rev. 6, 393-417 (2012
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.