The main objective of this work was to investigate the effect of hybridization on the mechanical and thermal properties of intralaminar natural fiber-reinforced hybrid composites based on sisal. Ramie, sisal and curauá fibers were selected as natural fiber reinforcements for the epoxy matrix based composites, which were produced by the hand lay-up technique. Tensile, flexural and impact tests were carried out according to American society for testing and materials (ASTM) standards to characterize the hybrid composites, while differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to evaluate the thermal properties. It was found that the mechanical properties are improved by hybridization of sisal based composites. The thermal analysis showed that the hybridization did not significantly affect the thermal stability of the composites. A scanning electron microscopy (SEM) was used to examine the fracture surface of the tested specimens. The SEM images showed a brittle fracture of the matrix and fiber breakage near the matrix.

Designing and fabricating hierarchical geometries for tissue engineering (TE) applications is the major challenge and also the biggest opportunity of regenerative medicine in recent years, being the in vitro recreation of the arcade-like cartilaginous tissue one of the most critical examples due to the current inefficient standard medical procedures and the lack of fabrication techniques capable of building scaffolds with the required architecture in a cost and time effective way.Taking this into account, we suggest a feasible and accurate methodology that uses a sequential adaptation of an electrospinning-electrospraying set up to construct a system comprising both fibres and sacrificial microparticles. Polycaprolactone (PCL) and polyethylene glycol were respectively used as bulk and sacrificial biomaterials, leading to a bi-layered PCL scaffold which presented not only a depth-dependent fibre orientation similar to natural cartilage, but also mechanical features and porosity compatible with cartilage TE approaches. In fact, cell viability studies confirmed the biocompatibility of the scaffold and its ability to guarantee suitable cell adhesion, proliferation and migration throughout the 3D anisotropic fibrous network.Additionally, likewise the natural anisotropic cartilage, the PCL scaffold was capable of inducing oriented cell-material interactions since the morphology, alignment and density of the chondrocytes changed relatively to the specific topographic cues of each electrospun layer.

Articular cartilage was expected to be one of the first tissues to be successfully engineered, but replicating the complex fibril architecture and the cellular distribution of the native cartilage has proven difficult. While electrospinning has been widely used to reproduce the depth-dependent fibre architecture in 3D scaffolds, the chondrocyte-controlled distribution remains an unsolved problem. To incorporate cells homogeneously through the depth of scaffolds, a combination of polymer electrospinning and cell seeding is necessary. A multi-layer approach alternating between polymer electrospinning with chondrocyte electrospraying can be a solution. Still, the success of this process is related to the survival rate of the electrosprayed chondrocytes embedded within the electrospun mesh. In this regard, the present study investigated the impact of the multi-layered process and the supplementation of the electrospray chondrocyte suspension with different concentrations of Gelatin and Alginate on the viability of electrosprayed chondrocytes embedded within a Polycaprolactone/Gelatin electrospun mesh and on the mechanical properties of the resulting meshes. The addition of Gelatin in the chondrocyte suspension did not increase significantly ( p > 0.05) the percentage of viable electrosprayed chondrocytes (25%), while 3 wt% Alginate addition led to a significant ( p < 0.05) increase in chondrocyte viability (50%) relative to the case without polymer supplement (15%). Furthermore, the addition of both polymer supplements increased the mechanical properties of the multi-layer construct. These findings imply that this multi-layered approach can be applied to cartilage TE allowing for automated chondrocyte integration during scaffolds creation.

The main objective of this work was to investigate the effect of intralaminar hybridization on the mode I fracture toughness of epoxy composites based on jute and sisal fabrics. Four types of composites were produced by the hand layup technique: sisal (S), sisal + curauá (S + C), jute (J) and jute + curauá (J + C). Double cantilever beam (DCB) tests were performed, and the modified beam theory (MBT) method and three different data criteria (i.e. the deviation from linearity (NL), the 5% offset/maximum load (5%/Max) and visual observation (VIS)) were used to evaluate the mode I fracture toughness (G Ic). It was found that the G Ic of S + C and J + C composites increased by hybridization of pure sisal and jute fabrics and that the intralaminar hybridization limited the crack propagation. An X-ray microcomputed tomography (µCT) equipment was used to visualize the delamination and the form of the front of cracks inside the hybrid composites.