This paper is presents a microstrap patch with a T-shaped rectangular antenna workings; the T-shaped patch operating at 3.6 GHz resonating frequency range for 5G application (from 2.9 to 4.4 GHz) repectively. The overall size of the proposed antenna is 22×24×0.25 mm3; the feeding technique using a 50 Ω feed line to the antenna. The proposed antenna is printed on compact Rogers RT 588 lz substrate having permittivity (ɛr) 2.00, loss tangent (tan δ) 0.0021, with thikness 0.2 mm. The proposed antenna introducesmany advantages like small size, low profile, and simpler structure. The characteristics such as radiation pattern, reflection coefficient, gain, current distribution, and radiation efficiency are respectively presented and discussed, using CST microwave study in simulating and analysing. Introducing a slot with a rectangular T-shaped patch antenna achieved lower frequency with 98.474% radiation efficiency and peak gain of the proposed antenna at 2.52 dB. The fractional bandwidth is 42.81% (2.90 GHz to 4.48 GHz) with a resonant frequency of 3.6 GHz and return loss at 28.76 dB. This frequency band attributessuited 5 G mobile application.

A new design of wideband branch-line coupler (BLC) using T-shape with open stub microstrip line is proposed. The branch line coupler is integrated with low and high impedance λ/4 transmission lines to achieve the comparatively compact size of (27.2 mm × 16.5 mm). operating the bandwidth in simulated of BLC from 2.9 to 4 GHz is obtained 30.22% with a frequency center of 3.5 GHz. Meanwhile, the measured bandwidth of the BLC is cover from 2.8 GHz to 4.22 GHz is equal 33.40% at the center frequency 3.55 GHz respectively. The BLC simulated has low isolation and high return loss of -29.28 dB and -30.69 dB at the center frequency 3.5 GHz.Whereas, the measured result has a simple difference in the return loss and isolation are -27.43dB and -24.46 dB at the frequency 3.55GHz respectively. This BLC design has a good coupling factor of -2.97 and insertion loss of -3.65 dB. Furthermore, it obtains an excellent amplitude and phases different between two output of ±0.1 and 93.6°±3.4° with high performance. There is a good agreement between the simulated result and the measured result. This branch line coupler design used for 5G applications for future wireless communication systems.

This paper describes the broadband monopole antenna refers to a signal wideband of the frequencies, which can be divided the signal into channels of the frequency bins. Aim this paper to design and development broadband monopole antenna. The monopole antenna was designed by adding slot to the radiated patch antenna with a single feed line, which reduced the size and the design complexity. A rectangular patch antenna was presented using feed line to decrease the ground plane with a suitable gap distance. The broadband monopole antenna was designed with a frequency range of 800 MHz -3 GHz, with Bandwidth 0.66 (dB), reflection coefficients and return loss. The frequency-dependent characteristic impedance was included. It can be used in various broadband applications in used commercially for various communication systems such as 4G (LTE), WiMAX and WLAN (LTE), remote sensing, biomedical, and mobile wireless. Apart from that, this technology is environment-friendly; an antenna which consists of reception and transmission. The antenna is simulated by using computer simulation (CST) software; using FR-4 substrate of 4.4 permittivity thickness 1.6 mm and loss tangent of 0.025. The measurement result is accepted with simulation result, proving the acceptable broadband operation for this proposed structure.

In this paper, a coplanar waveguide (CPW)-fed patch antenna is fabricated on a layer of metasurface to increase gain. The antenna is fabrication on Roger substrate with a thickness of 0.25 mm, with the overall dimension of the proposed design being 45 × 30 × 0.25 mm3. The size of the patch antenna is 24 × 14 × 0.25 mm3, and the AMC unit cell is 22 × 22 × 0.25 mm3. This metasurface is designed based on the split-ring resonator unit cells forming an array of the artificial magnetic conductor (AMC). Meanwhile, the antenna operation on 3.5 GHz is enabled by etching a split-ring resonator slot on the ground plane with a small gap to enhance antenna gain and improve impedance bandwidth when integrated with a metasurface. This simulation planer monopole antenna is applied for 5G application. The experimenter test is applied for the antenna performance in terms of return loss, gain, and radiation patterns. The operating frequency range with and without MTM is from 3.41 to 3.68 GHz (270 MHz) and 3.37 to 3.55 GHz (180 MHz), respectively, with gain improvements of about 2.7 dB (without MTM) to 6.0 dB (with MTM) at 3.5 GHz. The maximum improvement of the gain is about 42% when integrated with the AMC. The AMC has solved several issues to overcome the typical limitation in conventional antenna design. A circuit model is also proposed to simplify the estimation of the performance of this antenna at the desired frequency band. The proposed design is simulated by CST microwave studio. Finally, the antenna is fabricated and measured. Result comparison between simulations and measurements indicates a good agreement between them.