Pyrrole was covalently bonded to 1-methyl and 1-benzylimidazolium ionic liquids (ILs) via an N-substituted alkyl linkage to prepare electropolymerizable IL monomers with excellent thermal stability. The methylimidazolium IL, [pyrrole-CMIm], was then electropolymerized on macro- and microelectrode materials to form conductive polymeric IL (CPIL)-modified surfaces. Electrochemical characterization of a 1.6 mm diameter Pt disk electrode modified with poly[pyrrole-CMIm] demonstrated a selective uptake for an anionic redox probe while rejecting a cationic redox probe. Furthermore, electropolymerization of [pyrrole-CMIm] doped with single-walled carbon nanotubes (SWNT) on 125 μm platinum wires produced 42 μm thick poly[pyrrole-CMIm]/SWNT films compared to 17 μm in the absence of SWNT and 5 μm for the previously reported poly[thiophene-CMIm] coatings. The poly[pyrrole-CMIm]/SWNT films were prepared with reproducible thicknesses as well as thermal properties sufficient for high-temperature applications, such as solid-phase microextraction (SPME) with gas chromatographic analysis. The utilization of the CPIL sorbent materials in SPME experiments provided excellent extraction efficiencies and selectivity toward organic aromatic analytes. The CPIL sorbent coatings also yielded outstanding fiber-to-fiber reproducibility on the basis of extraction efficiencies and improved response for a range of analytes relative to commercial 100 μm poly(dimethylsiloxane) fibers when normalized for differences in film thickness. Poly[pyrrole-CMIm] CPIL coatings doped with SWNT are therefore promising new sorbent materials for SPME analyses.

No abstract

Three novel electropolymerizable thiophene-based ionic liquids (ILs) were synthesized and characterized as potential candidates for developing selective extraction media for chemical analysis. Electropolymerization of the bis[(trifluoromethyl)sulfonyl]imide ([NTf2](-)) analogs successfully produced uniform polymeric thin-films on macro- and microelectrode substrates from both vinyl and methylimidazolium IL monomer derivatives. The resultant conducting polymer IL (CPIL) films were characterized by electrochemical methods and found to exhibit attractive behavior towards anionic species while simultaneously providing an exclusion barrier toward cationic species. Thermogravimetric analysis of the thiophene-based IL monomers established a high thermal stability, particularly for the methylimidazolium IL, which was stable until temperatures above 350 °C. Subsequently, the methylimidazolium IL was polymerized on 125 μm platinum wires and utilized for the first time as a sorbent coating for headspace solid-phase microextraction (HS-SPME). The sorbent coating was easily prepared in a reproducible manner, provided high thermal stability, and allowed for the gas chromatographic analysis of polar analytes. The normalized response of the poly[thioph-C6MIm][NTf2]-based sorbent coating exhibited higher extraction efficiency compared to an 85 μm polyacrylate fiber and excellent fiber-to-fiber reproducibility. Therefore, the electropolymerizable thiophene-based ILs were found to be viable new materials for the preparation of sorbent coatings for HS-SPME.

A novel sorbent material, gold-polypyrrole (Au-PPy) nanocomposite-coated silica, is described for the efficient solid-phase extraction (SPE) of six common microcystins (MCs) well below the recommended United States EPA and World Health Organization (WHO) guidelines. With the optimized SPE protocol, samples spiked with MCs were determined at ng/L concentrations by liquid chromatography-mass spectrometry (LC-MS) in different aqueous sample matrices, including HPLC-grade, tap, and lake water. The average recoveries for all MCs tested in the three water matrices ranged from 94.1-103.2% with relative standard deviations (RSDs) of 1.6-5.4%, which indicated excellent extraction efficiency and reproducibility. Limits of detection (LODs) and limits of quantification (LOQs) for all MCs in both tap and lake water samples were determined to be ≤1.5 ng/L and 5.0 ng/L, respectively. The Au-PPy nanocomposite-coated sorbent material was reusable for at least three independent MC extractions with a single SPE cartridge in the concentration range of 10-500 ng/L. Importantly, off-column selective separation at the sample preparation and preconcentration stage between more hydrophilic and more hydrophobic MCs was achieved by sequential elution through changes in the solvent composition and SPE bed size. Therefore, the Au-PPy nanocomposite-coated silica sorbent is a promising new material for the quantification of MC variants in water samples.

No abstract