This work seeks to address the effect of simoultaneous use of three flame retardants, having three different modes of action, (magnesium hydroxide, expanded and expandable graphite) on the thermal degradation and flame retardancy of poly(ethylene-co-vinyl acetate). Thermal conductivity of samples was meseaured in order to investigate the effect of the use of expanded and expandable graphite on the time-to-ignition and the peak of heat release rate in cone calorimeter test. Thermal shielding performances of chars were studied as well. It was found that there is an optimum ratio between expanded and expandable graphite in order to control thermal conductivity and therefore fire properties. Some correlations were also found between the char thickness and the first peak of heat release rate.

No abstract

No abstract

In this work, glacial‐acetic (A) and citric (C) acids from organic acids “family with one and three functional groups, respectively", oleic acid (O) from the fatty acids family and sodium acetate (S) are used for esterification of corn starch in solution in the absence and the presence of 15%wt glycerin as a physical modifier. Discoloration test using CIELAB and as well as thermal gravimetric analysis shows that the glacial‐acetic acid leads to lower reduction in thermal characteristics of the modified starch. The variations of thermal properties start from T > 112 °C, T>136 °C, T>100 °C, and T> 124 °C for the modified starches with C, A, O, and S reagents, respectively, and the changes are constant beyond the amount of 4%wt reagent. The evaluations of kinetics and thermodynamics of thermal degradation reaction for the modified starches via a Coats–Redfern (CR) model prove that the acetic acid causes more activation energy for degradation compared to other reagents. Also, acetic acid‐modified starch demonstrates the highest hydrophobicity among other modified starches – even native starch – in the moisture sorption examination at 75% relative humidity (RH). The results illustrate that glycerin has the worst effect on the thermal and hydrophobicity properties of the modified starches.