No abstract

Monitoring and predicting space weather activity is increasingly important given society’s growing reliance on space-based infrastructure but is hampered by a lack of observational data. Airglow at 1083 nm from metastable helium He(23S) in the thermosphere has long been a target for remote-sensing instruments seeking to fill that gap; however, passive measurements of He(23S) fluorescence are limited by low brightness, and interpretation of these observations is complicated by the > 500 km depth of the He(23S) layer. Here, we demonstrate a lidar instrument that is able to stimulate and detect He(23S) fluorescence, and we present measured profiles of He(23S) density. These measurements provide crucial validation to space weather models, support predictions of peak number density ( ~ 1 cm−3) and the dependence of density on altitude, solar zenith angle, and season, and extend by a factor of 4 the maximum probed altitude range by an atmospheric profiling lidar. These measurements open the door for the development of more sophisticated lidars: by applying well-established spectroscopic lidar techniques, one can measure the Doppler shift and broadening of the He(23S) line, thereby retrieving profiles of neutral wind speed and temperature, opening a window for studying space weather phenomena.

No abstract

The accurate simulation of stray light is essential for the verification of the contrast requirements in optical instruments. In a spectrometer, the scattering from reflective gratings is difficult to characterize while contributing significantly to the overall system stray light and reduction of the spectrometer contrast. In addition, the multiple diffraction orders create a ghost sensitive environment, which must be considered in the design of the instrument. In this article, we present an experimental setup for, and measurement results from, the characterization of the bidirectional scattering distribution function (BSDF) of a holographic grating for a spectrometer applied in a typical earth observation mission with demanding stray light requirements. We observed distinct stray light peaks out of the diffraction plane, which are called ‘satellites.’ The main challenges in the measurement of grating BSDFs arise from the near angle limit, the determination of the instrument signature and the selection of the appropriate sampling (2D or 3D). Following the grating characterization, the next step is to introduce these measured BSDFs into stray light simulation. We have done that by fitting appropriate functions to the measured BSDF and defining them in the optical analysis software ASAP as a user-defined BSDF. Ghost analysis is done at the spectrometer level as a sensitivity analysis of the tilts of the optical elements. Due to the ghosting of higher diffraction orders of the grating, a high sensitivity to the tilts of some of the optical elements can be seen.

No abstract