Narrow atomically precise graphene nanoribbons hold great promise for electronic and optoelectronic applications, but the previously demonstrated nanoribbon-based devices typically suffer from low currents and mobilities. In this study, we explored the idea of lateral extension of graphene nanoribbons for improving their electrical conductivity. We started with a conventional chevron graphene nanoribbon, and designed its laterally extended variant. We synthesized these new graphene nanoribbons in solution and found that the lateral extension results in decrease of their electronic bandgap and improvement in the electrical conductivity of nanoribbon-based thin films. These films were employed in gas sensors and an electronic nose system, which showed improved responsivities to low molecular weight alcohols compared to similar sensors based on benchmark graphitic materials, such as graphene and reduced graphene oxide, and a reliable analyte recognition. This study shows the methodology for designing new atomically precise graphene nanoribbons with improved properties, their bottom-up synthesis, characterization, processing and implementation in electronic devices.

Despite the recent advances in bottom-up synthesis of different kinds of atomically precise graphene nanoribbons (GNRs) with very diverse physical properties, the translation of these GNRs into electronic devices remains challenging. Among other factors, the electronic characterization of GNRs is hampered by their complex synthesis that often requires custom-made organic precursors and the need for their transfer to dielectric substrates compatible with the conventional device fabrication procedures. In this paper, we demonstrate that uniform electrically conductive GNR films can be grown on arbitrary high-temperature-resistant substrates, such as metals, Si/SiO2, or silica glasses, by a simple chemical vapor deposition (CVD) approach based on thermal decomposition of commercially available perylenetetracarboxylic dianhydride molecules. The results of spectroscopic and microscopic characterization of the CVD-grown films were consistent with the formation of oxygen-terminated N = 5 armchair GNRs. The CVD-grown nanoribbon films exhibited an ambipolar electric field effect and low on–off ratios, which were in agreement with the predicted metallic properties of N = 5 armchair GNRs, and remarkable gas sensing properties to a variety of volatile organic compounds (VOCs). We fabricated a GNR-based electronic nose system that could reliably recognize VOCs from different chemical classes including alcohols (methanol, ethanol, and isopropanol) and amines (n-butylamine, diethylamine, and triethylamine). The simplicity of the described CVD approach and its compatibility with the conventional device fabrication procedures, as well as the demonstrated sensitivity of the GNR devices to a variety of VOCs, warrant further investigation of CVD-grown nanoribbons for sensing applications.

Reliable environmental monitoring requires cost effective but highly sensitive and selective gas sensors. While the sensitivity of the sensors is improved by reducing the characteristic dimensions of the gas-sensing material, the selectivity is often approached by combining the sensors into multisensor arrays. The development of scalable methods to manufacture such arrays based on low-dimensional structures offers new perspectives for gas sensing applications. Here we examine an approach to produce multisensor array chips based on the TiOx nanotube layers segmented by multiple Pt strip electrodes. We study the sensitivity and selectivity of the developed chip at operating temperatures up to 400 °C towards organic vapors in the ppm range. The results indicate that the titania nanotubes are a promising material platform for novel cost-effective and powerful gas-analytical multisensor units.

We report a deposition of the tin oxide/hydroxide nanostructured layer by the potentiodynamic method from acidic nitrate solutions directly over the substrate, equipped with multiple strip electrodes which is employed as a gas-analytical multisensor array chip. The electrochemical synthesis is set to favor the growth of the tin oxide/hydroxide phase, while the appearance of metallic Sn is suppressed by cycling. The as-synthesized tin oxide/hydroxide layer is characterized by mesoporous morphology with grains, 250–300 nm diameter, which are further crystallized into fine SnO2 poly-nanocrystals following heating to 300 °C for 24 h just on the chip. The fabricated layer exhibits chemiresistive properties under exposure to organic vapors, which allows the generation of a multisensor vector signal capable of selectively distinguishing various vapors.

No abstract