No abstract

No abstract

An assessment of the mechanical properties of the highly irradiated fuel claddings under high strain rate has been carried out in the framework of the PROME-TRA program undertaken by the French Institut de Ra-dioprotection et de Sûreté Nucléaire in collaboration with Electricité de France and Commissariat à l'Energie Atom-ique (CEA). Three types of tests, including burst tests, hoop and axial tensile tests, have been performed at CEA-Saclay hot laboratories to determine the cladding tensile properties to use in the SCANAIR code. The prototypicality of each test with regard to the reactivity-initiated accident loading conditions can be addressed and ana-lyzed in terms of strain or stress ratio. The high-strain-rate ductile mechanical properties of irradiated ZIRLO and M5 alloys derived from the PROMETRA program and their comparison to the stress-relieved irradiated Zircaloy-4 are reported. Then, the clad brittle behavior, in particular for highly corroded or spalled Zircaloy-4 cladding, is investigated.

The PROMETRA material testing program is a support program related to the study of high burnup fuel rod behavior under Reactivity Initiated Accidents (RIA) and to the interpretation of the CABRI REP-Na RIA test results. Hoop and axial tensile tests have been performed on fresh and irradiated Zircaloy-4 cladding alloy first at CEA Grenoble hot labs and now at CEA Saclay in order to assess the cladding mechanical behavior during RIA transients. Efforts have been continuously carried out in order to improve the prototipicallity of the tests for RIA studies involving new specimens and new testing techniques. The corrosion level of irradiated specimens reached up to 130 μm of oxide layer thickness. The influence of in-pile oxide layer spallation has also been addressed. High strain-rate material properties of irradiated Zircaloy-4 and the consequences of hydride embrittlement can be derived from the PROMETRA program.

Low-fluence laser interaction with metallic target is investigated in a wide range of irradiance, from 5 × 106 to 1011 W/cm2, with 4- and 30-ns laser-pulse durations and 1.06-μm wavelength. Edge effects are avoided by means of large surfaces of irradiation (5 cm2). Specific diagnostics such as a ballistic pendulum and a piezoelectric quartz gauge are developed to measure the total momentum imparted to the target, as well as the temporal evolution of the stress at the rear side of the target. Specular reflection and sidescattering of the laser light from the target are also measured. The behavior of 2024 aluminum alloy is particularly studied. The results are interpreted in terms of liquid-vapor transition and change in laser absorption.In light of experimental data, the theoretical analysis of surface absorption is reviewed, showing the dependence on metal temperature and laser wavelength. The thermal and mechanical coupling is also calculated.Numerical simulations are performed with a 1–D Lagrangian hydrodynamic code including modifications for low-pressure regimes. The multiphase equation of state is extended to take into account negative pressures. An elastoplastic module is introduced into the code. A quite good agreement is obtained with the measurements of the stress and of the mechanical coupling coefficient.