No abstract

The presence of chromium in the effluent is a major concern for the tanning industry. Currently, chemical precipitation methods are practiced for the removal of chromium from the effluent, but that leads to the formation of chrome-bearing solid wastes. The other membrane separation and ion exchange methods available are unfeasible due to their cost. In this study, the removal of chromium from tannery effluent has been carried out using abundantly available brown seaweed Sargassum wightii. Simulated chrome tanning solution was used for the standardization of experimental trials. Various factors influencing the uptake of chromium, viz., quantity of seaweed, concentrations of chromium, pH of the chrome-bearing wastewater, and duration of treatment, have been studied. Chemical modification of the seaweed through pretreatment with sulfuric acid, magnesium chloride, and calcium chloride showed improved uptake of chromium. Langmuir and Freundlich isotherms have been fitted for various quantities of seaweed. The dynamic method of treatment of protonated seaweed with simulated chrome tanning solution at a pH of 3.5-3.8 for a duration of 6 h gave the maximum uptake of about 83%. A similar uptake has been established for commercial chrome tanning wastewater containing the same concentration of chromium. The Sargassum species exhibited a maximum uptake of 35 mg of chromium per gram of seaweed. Fourier transform infrared spectroscopy, energy-dispersive X-ray analysis, and flame photometry studies have been carried out to understand the mechanistic pathway for the removal of chromium. The potential reuse of chromium-containing seaweed for the preparation of basic chromium sulfate (tanning agent) has been demonstrated.

No abstract

No abstract

We report here the preparation of nanoparticles of iron oxide in the presence of polysaccharide templates. Interaction between iron (II) sulfate and template has been carried out in aqueous phase, followed by the selective and controlled removal of the template to achieve narrow distribution of particle size. Particles of iron oxide obtained have been characterized for their stability in solvent media, size, size distribution and crystallinity and found that when the negative value of the zeta potential increases, particle size decreases. A narrow particle size distribution with D 100 = 275 nm was obtained with chitosan and starch templates. SEM measurements further confirm the particle size measurement. Diffuse reflectance UV-vis spectra values show that the template is completely removed from the final iron oxide particles and powder XRD measurements show that the peaks of the diffractogram are in agreement with the theoretical data of hematite. The salient observations of our study shows that there occurs a direct correlation between zeta potential, polydispersity index, bandgap energy and particle size. The crystallite size of the particles was found to be 30-35 nm. A large negative zeta potential was found to be advantageous for achieving lower particle sizes, owing to the particles remaining discrete without agglomeration.