We demonstrate the continuous and reversible tuning of the optical band gap of suspended monolayer MoS 2 membranes by as much as 500 meV by applying very large biaxial strains. By using chemical vapor deposition (CVD) to grow crystals that are highly impermeable to gas, we are able to apply a pressure difference across suspended membranes to induce biaxial strains. We observe the effect of strain on the energy and intensity of the peaks in the photoluminescence (PL) spectrum, and find a linear tuning rate of the optical band gap of 99 meV/%. This method is then used to study the PL spectra of bilayer and trilayer devices under strain, and to find the shift rates and Grüneisen parameters of two Raman modes in monolayer MoS 2 . Finally, we use this result to show that we can apply biaxial strains as large as 5.6% across micron sized areas, and report evidence for the strain tuning of higher level optical transitions.KEYWORDS: Strain engineering, MoS 2 , photoluminescence, bandgap, Raman spectroscopy, biaxial strain 3 The ability to produce materials of truly nanoscale dimensions has revolutionized the potential for modulating or enhancing the physical properties of semiconductors by mechanical strain 1 . Strain engineering is routinely used in semiconductor manufacturing, with essential electrical components such as the silicon transistor or quantum well laser using strain to improve efficiency and performance 2,3 . Nano-structured materials are particularly suited to this technique, as they are often able to remain elastic when subject to strains many times larger than their bulk counterparts can withstand 4 . For instance, bulk silicon fractures when strained to just 1.2%, whereas silicon nanowires can reach strains of as much as 3.5% 5 . Parameters such as the band gap energy or carrier mobility of a semiconductor, which are often crucial to the electronic or photonic device performance, can be highly sensitive to the application of only small strains. The combination of this sensitivity with the ultra-high strains possible at the nanoscale could lead to an unprecedented ability to modify the electrical or photonic properties of materials in a continuous and reversible manner.Monolayer MoS 2, a 2D atomic crystal, has been shown in both theory 6,7 and experiment [8][9][10][11][12] to be an ideal candidate for strain engineering. It belongs to the class of 2D transition metal dichalcogonides (TMD's), and as a direct-gap semiconductor 13 has received significant interest as a channel material in transistors 14 , photovoltaics 15 and photodetection 16 devices. It has a breaking strain of 6-11% as measured by nanoindentation, which approaches its maximum theoretical strain limit 17 and classifies it as an ultra-strength material. Its electronic structure has also proven to be highly sensitive to strain, with experiments showing that the optical band gap reduces by ~50 meV/% for 4 uniaxial strain 8,11 , and is predicted to reduce by ~100 meV/% for biaxial strain 18,19 . This reversible modulation of the band...

When coated with microscale hydrophobic particles, macroscopic liquid droplets can become non-wetting liquid marbles that exhibit an array of fascinating solid-like properties. Specifically, the force required to uniaxially compress liquid marbles depends on their volume, but it is unclear if the particle coating plays a role. In contrast, the failure of marbles upon compression does depend on the particle coating, but the conditions for failure do not appear to change with marble volume. Here, we experimentally study the elastic deformation and failure of liquid marbles and, by applying a doubly truncated oblate spheroid model to quantify their surface area, explore the role of marble volume and particle composition. First, we find that the work required to compress liquid marbles agrees with the product of the core fluid surface tension and the change in the marble surface area, validating that the elastic mechanics of liquid marbles is independent of the particle coating. Next, we study marble failure by measuring their ductility as quantified by the maximum fractional increase in marble surface area prior to rupture. Not only does marble ductility depend on the particle coating, but it also depends on marble volume with smaller marbles being more ductile. This size effect is attributed to an interaction between marble curvature and particle rafts held together by interparticle forces. These results illuminate new avenues to tailor the rupture of liquid marbles for applications spanning smart fluid handling and pollution mitigation.

No abstract

No abstract

The propagation of acoustic and elastic waves in time-varying, spatially homogeneous media can exhibit different phenomena when compared to traditional spatially varying, temporally homogeneous media. In the present work, the response of a one-dimensional phononic lattice with time-periodic elastic properties is studied with experimental, numerical and theoretical approaches in both linear and nonlinear regimes. The system consists of repelling magnetic masses with grounding stiffness controlled by electrical coils driven with electrical signals that vary periodically in time. For small-amplitude excitation, in agreement with linear theoretical predictions, wave-number band gaps emerge. The underlying instabilities associated to the wave-number band gaps are investigated with Floquet theory and the resulting parametric amplification is observed in both theory and experiments. In contrast to genuinely linear systems, large-amplitude responses are stabilized via the nonlinear nature of the magnetic interactions of the system, and results in a family of nonlinear time-periodic states. The bifurcation structure of the periodic states is studied. It is found the linear theory correctly predicts parameter values from which the time-periodic states bifurcate from the zero state. In the presence of an external drive, the parametric amplification induced by the wave-number band gap can lead to bounded and stable responses that are temporally quasiperiodic. Controlling the propagation of acoustic and elastic waves by balancing nonlinearity and external modulation offers a new dimension in the realization of advanced signal processing and telecommunication devices. For example, it could enable time-varying, cross-frequency operation, modeand frequency-conversion, and signal-to-noise ratio enhancements.