Scattering mechanisms in graphene are critical to understanding the limits of signal-to-noise ratios of unsuspended graphene devices. Here we present the four-probe low-frequency noise (1/f) characteristics in back-gated single layer graphene (SLG) and bilayer graphene (BLG) samples. Contrary to the expected noise increase with the resistance, the noise for SLG decreases near the Dirac point, possibly due to the effects of the spatial charge inhomogeneity. For BLG, a similar noise reduction near the Dirac point is observed, but with a different gate dependence of its noise behavior. Some possible reasons for the different noise behavior between SLG and BLG are discussed.

We demonstrate vertical graphene-base hot-electron transistors (GB-HETs) with a variety of structures and material parameters. Our GB-HETs exhibit a current saturation with a high current on-off ratio (>10(5)), which results from both the vertical transport of hot electrons across the ultrathin graphene base and the filtering of hot electrons through a built-in energy barrier. The influences of the materials and their thicknesses used for the tunneling and filtering barriers on the common-base current gain α are studied. The optimization of the SiO2 thickness and using HfO2 as the filtering barrier significantly improves the common-base current gain α by more than 2 orders of magnitude. The results demonstrate that GB-HETs have a great potential for high-frequency, high-speed, and high-density integrated circuits.

The vertical transport of nonequilibrium charge carriers through semiconductor heterostructures has led to milestones in electronics with the development of the hot-electron transistor. Recently, significant advances have been made with atomically sharp heterostructures implementing various two-dimensional materials. Although graphene-base hot-electron transistors show great promise for electronic switching at high frequencies, they are limited by their low current gain. Here we show that, by choosing MoS2 and HfO2 for the filter barrier interface and using a noncrystalline semiconductor such as ITO for the collector, we can achieve an unprecedentedly high-current gain (α ∼ 0.95) in our hot-electron transistors operating at room temperature. Furthermore, the current gain can be tuned over 2 orders of magnitude with the collector-base voltage albeit this feature currently presents a drawback in the transistor performance metrics such as poor output resistance and poor intrinsic voltage gain. We anticipate our transistors will pave the way toward the realization of novel flexible 2D material-based high-density, low-energy, and high-frequency hot-carrier electronic applications.

The experimental observation of band-to-band tunneling in novel tunneling field-effect transistors utilizing a monolayer of MoS as the conducting channel is demonstrated. Our results indicate that the strong gate-coupling efficiency enabled by two-dimensional materials, such as monolayer MoS , results in the direct manifestation of a band-to-band tunneling current and an ambipolar transport.