As fiber reinforced plastic composites gain an increasingly larger share in aerospace structures, the problem of joining them with metal elements becomes significant. The current paper is the second part of the literature review, which gathers and evaluates knowledge about methods suitable for the mechanical joining of composite and metal elements. This paper reviews the joining methods other than bolted joining, which are discussed in the first part of the review, namely self-piercing riveting, friction riveting, clinching, non-adhesive form-locked joints, pin joints, and loop joints. Some of those methods are full-fledged and employed in commercial applications, whereas others are merely ideas tested at the level of specimens. The current review describes the ideas and the qualities of the joining methods as well as the experimental work carried out so far. The summary section of this paper contains a comparison of those methods with the reference to their qualities, which is important from the point of view of a composite structure designer: possibility of the joint disassembly, damages induced in composite, complication level, weight penalty, range of possible materials to be joined, and the joint strength.

We describe the rationale, concept, design and implementation of a fixed-motion (nonadjustable) mechanism for insect-like flapping wing micro air vehicles in hover, inspired by two-winged flies (Diptera). This spatial (as opposed to planar) mechanism is based on the novel idea of a double spherical Scotch yoke. The mechanism was constructed for two main purposes: (i) as a test bed for aeromechanical research on hover in flapping flight, and (ii) as a precursor design for a future flapping wing micro air vehicle. Insects fly by oscillating (plunging) and rotating (pitching) their wings through large angles, while sweeping them forwards and backwards. During this motion the wing tip approximately traces a 'figure-ofeight' or a 'banana' and the wing changes the angle of attack (pitching) significantly. The kinematic and aerodynamic data from free-flying insects are sparse and uncertain, and it is not clear what aerodynamic consequences different wing motions have. Since acquiring the necessary kinematic and dynamic data from biological experiments remains a challenge, a synthetic, controlled study of insect-like flapping is not only of engineering value, but also of biological relevance. Micro air vehicles are defined as flying vehicles approximately 150 mm in size (hand-held), weighing 50-100 g, and are developed to reconnoitre in confined spaces (inside buildings, tunnels, etc.). For this application, insect-like flapping wings are an attractive solution and hence the need to realize the functionality of insect flight by engineering means. Since the semi-span of the insect wing is constant, the kinematics are spatial; in fact, an approximate figure-of-eight/banana is traced on a sphere. Hence a natural mechanism implementing such kinematics should be (i) spherical and (ii) generate mathematically convenient curves expressing the figure-of-eight/banana shape. The double spherical Scotch yoke design has property (i) by definition and achieves (ii) by tracing spherical Lissajous curves.

This paper describes the concept of a four-bar linkage mechanism for flapping wing micro air vehicles and outlines its design, implementation, and testing. Micro air vehicles (MAVs) are defined as flying vehicles ca. 150 mm in size (handheld), weighing 50–100 g, and are developed to reconnoiter in confined spaces (inside buildings, tunnels, etc.). For this application, insectlike flapping wings are an attractive solution and, hence, the need to realize the functionality of insect flight by engineering means. Insects fly by oscillating (plunging) and rotating (pitching) their wings through large angles, while sweeping them forward and backward. During this motion, the wing tip approximately traces a figure eight and the wing changes the angle of attack (pitching) significantly. The aim of the work described here was to design and build an insectlike flapping mechanism on a 150 mm scale. The main purpose was not only to construct a test bed for aeromechanical research on hover in this mode of flight, but also to provide a precursor design for a future flapping-wing MAV. The mechanical realization was to be based on a four-bar linkage combined with a spatial articulation. Two instances of idealized figure eights were considered: (i) Bernoulli’s lemniscate and (ii) Watt’s sextic. The former was found theoretically attractive, but impractical, while the latter was both theoretically and practically feasible. This led to a combination of Watt’s straight-line mechanism with a drive train utilizing a Geneva wheel and a spatial articulation. The actual design, implementation, and testing of this concept are briefly described at the end of the paper.

No abstract

No abstract