No abstract

Abstract:The terahertz (THz) frequency quantum cascade laser (QCL) is a compact source of high-power radiation with a narrow intrinsic linewidth. As such, THz QCLs are extremely promising sources for applications including high-resolution spectroscopy, heterodyne detection, and coherent imaging. We exploit the remarkable phase-stability of THz QCLs to create a coherent swept-frequency delayed self-homodyning method for both imaging and materials analysis, using laser feedback interferometry. Using our scheme we obtain amplitude-like and phase-like images with minimal signal processing. We determine the physical relationship between the operating parameters of the laser under feedback and the complex refractive index of the target and demonstrate that this coherent detection method enables extraction of complex refractive indices with high accuracy. This establishes an ultimately compact and easy-to-implement THz imaging and materials analysis system, in which the local oscillator, mixer, and detector are all combined into a single laser. References and links 1. B. Hu and M. Nuss, "Imaging with terahertz waves," Opt. Lett. 20, 1716Lett. 20, -1718Lett. 20, (1995 36, 2587-2589 (2011). 29. S. Donati, "Developing self-mixing interferometry for instrumentation and measurements," Laser Photon. Rev. 6, 393-417 (2012

Article:Dean, P, Lim, Y, Valavanis, A et al. (10 more authors) (2011) Terahertz imaging through self-mixing in a quantum cascade laser. Optics Letters, 36 (13 We demonstrate terahertz (THz) frequency imaging using a single quantum cascade laser (QCL) device for both generation and sensing of THz radiation. Detection is achieved by utilizing the effect of self-mixing in the THz QCL, and, specifically, by monitoring perturbations to the voltage across the QCL, induced by light reflected from an external object back into the laser cavity. Self-mixing imaging offers high sensitivity, a potentially fast response, and a simple, compact optical design, and we show that it can be used to obtain high-resolution reflection images of exemplar structures.

Electron transport in GaAs/AlGaAs quantum cascade lasers operating in midinfrared is calculated self-consistently using an intersubband scattering model. Subband populations and carrier transition rates are calculated and all relevant electron-LO phonon and electron-electron scatterings between injector/collector, active region, and continuum resonance levels are included. The calculated carrier lifetimes and subband populations are then used to evaluate scattering current densities, injection efficiencies, and carrier backflow into the active region for a range of operating temperatures. From the calculated modal gain versus total current density dependencies the output characteristics, in particular the gain coefficient and threshold current, are extracted. For the original GaAs/Al 0.33 Ga 0.67 As quantum cascade structure ͓C. Sirtori et al., Appl. Phys. Lett. 73, 3486 ͑1998͔͒ these are found to be gϭ11.3 cm/kA and J th ϭ6Ϯ1 kA/cm 2 ͑at Tϭ77 K͒, and gϭ7.9 cm/kA and J th ϭ10Ϯ1 kA/cm 2 ͑at Tϭ200 K͒, in good agreement with the experiment. Calculations shows that threshold cannot be achieved in this structure at Tϭ300 K, due to the small gain coefficient and the gain saturation effect, also in agreement with experimental findings. The model thus promises to be a powerful tool for the prediction and optimization of new, improved quantum cascade structures.

Designs of GaN/AlGaN quantum-cascade lasers emitting at 34 and 38 μm (ΔE∼36 and 34 meV) are presented, assuming either a- or c-plane crystal growth orientation. In the calculation of the quasibound state energies and wave functions, we account for the intrinsic electric field induced by piezoelectric and (in case of c-plane growth) the spontaneous polarization. The quantum-cascade structures were simulated, and their output characteristics extracted, using a fully self-consistent rate equation model with all relevant intra- and interperiod scatterings included. Both electron–LO-phonon and electron–electron scattering mechanisms are taken into account. Maximal population inversions between active laser states of up to 19% for the a-plane, and up to 40% for the c-plane design, are predicted and, based on estimated modal gain and waveguide/mirror losses in suitably designed structures, these indicate the feasibility of laser action in GaN/AlGaN cascades.