No abstract

A biodegradable UV-cured resin has been fabricated via stereolithography apparatus (SLA). The formulation consists of a commercial polyurethane resin as an oligomer, trimethylolpropane trimethacrylate (TEGDMA) as a reactive diluent and phenylbis (2, 4, 6-trimethylbenzoyl)-phosphine oxide (Irgacure 819) as a photoinitiator. The tensile strength of the three-dimensional (3D) printed specimens is 68 MPa, 62% higher than that of the reference specimens (produced by direct casting). The flexural strength and modulus can reach 115 MPa and 5.8 GPa, respectively. A solvent-free method is applied to fabricate graphene-reinforced nanocomposite. Porous bone structures (a jawbone with a square architecture and a sternum with a round architecture) and gyroid scaffold of graphene-reinforced nanocomposite for bone tissue engineering have been 3D printed via SLA. The UV-crosslinkable graphene-reinforced biodegradable nanocomposite using SLA 3D printing technology can potentially remove important cost barriers for personalized biological tissue engineering as compared to the traditional mould-based multistep methods.

A solvent-free method to fabricate graphene-reinforced nanocomposites in net shape via digital light processing (DLP) 3D printing has been developed in this work. The effect of graphene nanofillers on resin viscosity and wettability for various printing parameters has been examined, with a systematic characterization of the mechanical and thermomechanical properties. With the addition of 0.5 wt.% graphene nanoplatelets in the resin, the flexural modulus and fracture toughness have been improved by 14% and 28% from neat resin, respectively. Thermomechanical properties of graphene-reinforced nanocomposites were also enhanced compared with the neat resin, without scarification in their printability. The feasibility of utilizing the DLP method to fabricate a fracture toughness specimen (KIC test) without complex skill-dependent notch preparation steps was explored, with different notch tip angles printed for net-shaped specimens. This provided a simple and versatile way to perform a quick examination of reinforcing efficiency from nanofillers at very low cost with high resolution and reproducibility. To demonstrate the suitability of current resins for complexly shaped structures, a gyroid scaffold for tissue engineering applications based on current graphene nanocomposite resins has been successfully fabricated via DLP, showing the great potential of current photocurable resins for applications in various fields such as tissue engineering or personalized medical devices without the cost barriers of traditional methods.

No abstract

Due to the intrinsically limited mechanical properties, functionalities and structures of mineral materials made through traditional fabrication approaches, there is a critical need to develop new 3D forming techniques that can construct mineral composite materials and their structures with high performance and functionalities. The Direct Ink Writing (DIW) approach offers many advantages in the fabrication of mineral materials composites, including high precision, cost effectiveness, customized geometry and environmental friendliness. This review gives a comprehensive overview on the state of the art of DIW mineral materials, including materials classification, preparation and properties. It presents the critical steps for processing mineral materials and their effects on the properties and performance of mineral materials. In addition, the applications of DIW in the fields of architecture, tissue engineering, functional micro parts and geological engineering modelling are presented.