Indirect combustion noise is caused by entropy spots that are accelerated at the first turbine stage. These so-called entropy waves originate from the equivalence ratio fluctuations in the air–fuel mixture upstream of the flame. As entropy waves propagate convectively through the combustion chamber, they are subject to diffusion and dispersion. Because of the inherent difficulty of accurately measuring the burned gas temperature with sufficient temporal resolution, experimental data of entropy waves are scarce. In this work, the transfer function between equivalence ratio fluctuations and entropy fluctuations is modeled by a linearized reactor model, and the transport of entropy waves is investigated based on a convection-diffusion model. Temperature fluctuations are measured by means of a novel measurement technique at different axial positions downstream of the premixed flame, which is forced by periodic fuel injection. Experiments with various flow velocities and excitation frequencies enable model validation over a wide range of parameters.

No abstract

No abstract

Lean premixed combustion promotes the occurrence of thermoacoustic phenomena in gas turbine combustors. One mechanism that contributes to the flame–acoustic interaction is entropy noise. Fluctuations of the equivalence ratio in the mixing section cause the generation of hot spots in the flame. These so-called entropy waves are convectively transported to the first stage of the turbine and generate acoustic waves that travel back to the flame; a thermoacoustic loop is closed. However, due to the lack of experimental tools, a detailed investigation of entropy waves in gas turbine combustion systems has not been possible up to now. This work presents an acoustic time-of-flight based temperature measurement method which allows the measurement of temperature fluctuations in the relevant frequency range. A narrow acoustic pulse is generated with an electric spark discharge close to the combustor wall. The acoustic response is measured at the same axial location with an array of microphones circumferentially distributed around the combustion chamber. The delay in the pulse arrival times corresponds to the line-integrated inverse speed of sound. For the measurement of entropy waves in an atmospheric combustion test rig, fuel is periodically injected into the mixing tube of a premixed combustor. The subsequently generated entropy waves are measured for different forcing frequencies of the fuel injection and for different mean flow velocities in the combustor. The amplitude decay and phase lag of the entropy waves adhere well to a Strouhal number scaling for different mean flow velocities.

Lean premixed combustion promotes the occurrence of thermoacoustic phenomena in gas turbine combustors. One mechanism that contributes to the flame-acoustic interaction is entropy noise. Fluctuations of the equivalence ratio in the mixing section cause the generation of hot spots in the flame. These so called entropy waves are convectively transported to the first stage of the turbine and generate acoustic waves that travel back to the flame; a thermoacoustic loop is closed. However, due to the lack of experimental tools, a detailed investigation of entropy waves in gas turbine combustion systems has not been possible up to now. This work presents an acoustic time-of-flight based temperature measurement method which allows the detection of temperature fluctuations in the relevant frequency range. A narrow acoustic pulse is generated with an electric spark discharge close to the combustor wall. The acoustic response is measured at the same axial location with an array of microphones circumferentially distributed around the combustion chamber. The delay in the pulse arrival times corresponds to the line-integrated inverse speed of sound. For validation of this new method an experimental setup was developed capable of generating well defined entropy waves. As a reference temperature measurement technique a hot-wire anemometer is employed. For the measurement of entropy waves in an atmospheric combustion test rig, fuel is periodically injected into the mixing tube of a premixed combustor. The subsequently generated entropy waves are detected for different forcing frequencies of the fuel injection and for different mean flow velocities in the combustor. The amplitude decay and phase lag of the entropy waves adheres well to a Strouhal number scaling for different mean flow velocities. In addition, simultaneously to the entropy wave measurement, the equivalence ratio fluctuations in the mixing tube are detected using the Tunable Diode Laser Absorption Spectroscopy (TDLAS) technique.