No abstract

If you would like to write for this, or any other Emerald publication, then please use our Emerald for Authors service information about how to choose which publication to write for and submission guidelines are available for all. Please visit www.emeraldinsight.com/authors for more information. About Emerald www.emeraldinsight.comEmerald is a global publisher linking research and practice to the benefit of society. The company manages a portfolio of more than 290 journals and over 2,350 books and book series volumes, as well as providing an extensive range of online products and additional customer resources and services.Emerald is both COUNTER 4 and TRANSFER compliant. The organization is a partner of the Committee on Publication Ethics (COPE) and also works with Portico and the LOCKSS initiative for digital archive preservation. AbstractPurpose -This paper aims to present systematic studies of a wide spectrum of geometrical and electrical properties of thick-film and LTCC microresistors (with designed dimensions between 50 £ 50 mm 2 and 800 £ 200 mm 2 ). Design/methodology/approach -The geometrical parameters (average length, width and thickness, relations between designed and real dimensions, distribution of planar dimensions) are correlated with basic electrical properties of resistors (sheet resistance and its distribution, hot temperature coefficient of resistance and its distribution distribution) as well as long term thermal stability and durability of microresistors to short electrical pulses. Findings -Fodel process gives better resolution than standard screen-printing and leads to smaller dimensions than designed, smaller absolute error and better uniformity of planar sizes. Microresistors made in full Fodel process show much weaker dimensional effect and exhibit noticeably smaller distribution of basic electrical properties. Originality/value -Presents systematic studies of a wide spectrum of geometrical and electrical properties of thick-film and LTCC microresistors.

Laser trimming is the most effective and popular trimming method of thick-film and LTCC resistors at present. It is also still a subject of continuing theoretical and experimental analysis and optimization. Very recently a new approach to this process was suggested. It consists in replacing two-contact bar resistors by three-contact distributed structures trimmed by narrow cuts just around additional contact of different shape [1,2]. This paper presents experimental verification of such an approach. The relative trim characteristic and sensitivity are analyzed as a function of additional contact shape and cut length. Next long-term stability, pulse durability and low frequency noise are compared for two- and three-contact resistors versus trim pathway length. These investigations are completed by simulation of electrical potential distribution in two- and three-contact resistors with various length of trimming kerf.

No abstract

Access to this document was granted through an Emerald subscription provided by emerald-srm:368933 [] For AuthorsIf you would like to write for this, or any other Emerald publication, then please use our Emerald for Authors service information about how to choose which publication to write for and submission guidelines are available for all. Please visit www.emeraldinsight.com/authors for more information. About Emerald www.emeraldinsight.comEmerald is a global publisher linking research and practice to the benefit of society. The company manages a portfolio of more than 290 journals and over 2,350 books and book series volumes, as well as providing an extensive range of online products and additional customer resources and services.Emerald is both COUNTER 4 and TRANSFER compliant. The organization is a partner of the Committee on Publication Ethics (COPE) and also works with Portico and the LOCKSS initiative for digital archive preservation. AbstractPurpose -A capacitor is a basic electronic passive component. Thick-film technology allows manufacturing of capacitors covering the range of small and medium capacitances and they have been investigated in depth already. Low temperature co-fired ceramics (LTCC) technology makes it possible to fabricate buried capacitors, which leads to increased packaging density, but such components' properties are not well known. The purpose of this paper is to present the results of investigations on thick-film and LTCC capacitors made in various technological variants. Design/methodology/approach -Thick-film and LTCC capacitors were made in various technological variants. Different capacitor inks, metallurgy of electrodes and component constructions were investigated. Basic electrical properties and stability were determined. An electrical equivalent circuit of such components was developed based on frequency and temperature characteristics. Findings -Simple electrical equivalent circuits of self-made thick-film and LTCC micro-capacitors were developed based on measurements in frequency and temperature domain. Good fitting accuracy was obtained. The bulk material section of model is predominant in the low-frequency range. Interface region and serial resistance influence are revealed at higher frequency, affecting mainly dissipation factor value. Also, temperature and thermal ageing have affected strongly on that part of the model. Originality/value -The paper usefully examines the electrical properties and electrical equivalent models of thick-film and LTCC micro-capacitors.