A hybrid solar photovoltaic (PV)/biomass generator (BG) energy-trading framework between grid supply and base stations (BSs) is proposed in this article to address the power crisis of the utility grid, to enhance energy self-reliance, and to downsize the cost. The optimal size, technical criteria, energy generation, and different types of costs have been evaluated considering the dynamic behavior of solar radiation, traffic arrival intensity, and average biomass energy potential. Additionally, the wireless network performance in terms of total achievable throughput, spectral efficiency (SE), and energy efficiency (EE) are extensively examined using the MATLAB-based Monte-Carlo simulations taking multipath fading, system bandwidth, transmission power, and inter-cell interference (ICI) into consideration. The numerical results demonstrate that the energy-trading facility can achieve net present cost (NPC) and greenhouse gas saving up to 3.20% and 65.8%, respectively. In the end, the performance of the hybrid solar PV/BG system has been thoroughly compared with the standalone solar PV, hybrid PV/wind turbine (WT), and hybrid PV/diesel generator (DG) systems under on-grid and off-grid configurations for benchmarking.

In variable speed applications, the cycloconverter-based AC to AC power conversion technique has gained more attention among researchers and academics than the traditional rectifier-inverter-based AC to AC power conversion process. The conventional rectifier-inverter-based AC to AC power conversion process has several disadvantages. It uses multi-power stages that increase the converter power conversion losses and increase the cost, volume, and weight of power losses. Besides high conduction and switching losses, the electromagnetic interference problems also accompany the above issues. In this regard, this paper proposes a novel step-down Triac based cycloconverter for variable speed control applications. The proposed topology uses only five Triac devices for one-third and one-fourth frequency conversion of 50 Hz with reduced total harmonics distortion without using any pulse width modulation techniques. The proposed model is designed in the MATLAB/SIMULINK environment. The simulation results show that around 18.85% and 23.67% of total harmonics distortions are reduced in the proposed converter for one-third and one-fourth frequency conversion of 50 Hz, respectively. Two physical experiments are carried out to prove the validity of the simulation results.

No abstract

No abstract

No abstract