No abstract

Perovskite-based solar cells have recently been catapulted to the cutting edge of thin-film photovoltaic research and development because of their promise for high-power conversion efficiencies and ease of fabrication. Two types of generic perovskites compounds have been used in cell fabrication: either Pb- or Sn-based. Here, we describe the performance of perovskite solar cells based on alloyed perovskite solid solutions of methylammonium tin iodide and its lead analogue (CH3NH3Sn(1-x)Pb(x)I3). We exploit the fact that, the energy band gaps of the mixed Pb/Sn compounds do not follow a linear trend (the Vegard's law) in between these two extremes of 1.55 and 1.35 eV, respectively, but have narrower bandgap (<1.3 eV), thus extending the light absorption into the near-infrared (~1,050 nm). A series of solution-processed solid-state photovoltaic devices using a mixture of organic spiro-OMeTAD/lithium bis(trifluoromethylsulfonyl)imide/pyridinium additives as hole transport layer were fabricated and studied as a function of Sn to Pb ratio. Our results show that CH3NH3Sn(0.5)Pb(0.5)I3 has the broadest light absorption and highest short-circuit photocurrent density ~20 mA cm(-2) (obtained under simulated full sunlight of 100 mW cm(-2)).

We introduce a new class of molecular iodosalt compounds for application in next-generation solar cells. Unlike tin-based perovskite compounds CsSnI3 and CH3NH3SnI3, which have Sn in the 2+ oxidation state and must be handled in an inert atmosphere when fabricating solar cells, the Sn in the molecular iodosalt compounds is in the 4+ oxidation state, making them stable in air and moisture. As an example, we demonstrate that, using Cs2SnI6 as a hole transporter, we can successfully fabricate in air a solid-state dye-sensitized solar cell (DSSC) with a mesoporous TiO2 film. Doping Cs2SnI6 with additives helps to reduce the internal device resistance, improving cell efficiency. In this way, a Z907 DSSC delivers 4.7% of energy conversion efficiency. By using a more efficient mixture of porphyrin dyes, an efficiency near 8% with photon confinement has been achieved. This represents a significant step toward the realization of low-cost, stable, lead-free, and environmentally benign next-generation solid-state solar cells.

Organo-lead halide perovskite solar cells have gained enormous significance and have now achieved power conversion efficiencies of ∼20%. However, the potential toxicity of lead in these systems raises environmental concerns for widespread deployment. Here we investigate solvent effects on the crystallization of the lead-free methylammonium tin triiodide (CH3NH3SnI3) perovskite films in a solution growth process. Highly uniform, pinhole-free perovskite films are obtained from a dimethyl sulfoxide (DMSO) solution via a transitional SnI2·3DMSO intermediate phase. This high-quality perovskite film enables the realization of heterojunction depleted solar cells based on mesoporous TiO2 layer but in the absence of any hole-transporting material with an unprecedented photocurrent up to 21 mA cm(-2). Charge extraction and transient photovoltage decay measurements reveal high carrier densities in the CH3NH3SnI3 perovskite device which are one order of magnitude larger than CH3NH3PbI3-based devices but with comparable recombination lifetimes in both devices. The relatively high background dark carrier density of the Sn-based perovskite is responsible for the lower photovoltaic efficiency in comparison to the Pb-based analogues. These results provide important progress toward achieving improved perovskite morphology control in realizing solution-processed highly efficient lead-free perovskite solar cells.

Depositing a pinhole-free perovskite film is of paramount importance to achieve high performance perovskite solar cells, especially in a heterojunction device format that is free of hole transport material (HTM). Here, we report that high-quality pinhole-free CH3NH3PbI3 perovskite film can be controllably deposited via a facile low-temperature (<150 °C) gas-solid crystallization process. The crystallite formation process was compared with respect to the conventional solution approach, in which the needle-shaped solvation intermediates (CH3NH3PbI3·DMF and CH3NH3PbI3·H2O) have been recognized as the main cause for the incomplete coverage of the resultant film. By avoiding these intermediates, the films crystallized at the gas-solid interface offer several beneficial features for device performance including high surface coverage, small surface roughness, as well as controllable grain size. Highly efficient HTM-free perovskite solar cells were constructed with these pinhole-free CH3NH3PbI3 films, exhibiting significant enhancement of the light harvesting in the long wavelength regime with respect to the conventional solution processed one. Overall, the gas-solid method yields devices with an impressive power conversion efficiency of 10.6% with high reproducibility displaying a negligible deviation of 0.1% for a total of 30 cells.