No abstract

This work presents the performance and stability analysis of the proposed built-in self-read and write assist 10T SRAM (BSRWA 10T) for better performance in terms of thermal stability and fast write access, which is suitable for military and aerospace applications. The performance of the proposed SRAM cell dominates the previous SRAM cells, i.e., conventional, fully differential 10T-ST (FD 10T-ST), single stacked disturbance-free 9T-ST (SSDF 9T-ST). The proposed SRAM cell dominates the SSDF 9T-ST SRAM cell in terms of write ability. The built-in self-read and write assist structure of the memory cell also dominates the improved write ability of SSDF 9T-ST SRAM by assist circuits such as negative bit line, ultra-dynamic voltage scaling (UDVS), write assist combining negative BL, and VDD collapse. The impact of assist circuits on write performance of memory cells is observed using Monte Carlo simulation for write margin (WM) parameter. WM of SSDF 9T-ST SRAM is improved by 15% and 25% by adding UDVS assist circuit and write assist combining negative BL and VDD collapse circuit. But BSRWA SRAM cell itself can improve WM by 32% without any assist circuit. The impact of temperature variation on the performance of memory cells is observed using Monte Carlo simulation for the HSNM parameter. The deviation of HSNM for 15°C to 55°C is 14%, 5%, 4%, and 1% in conventional SRAM cell, FD 10T SRAM cell, SSDF 9T SRAM cell, and proposed BSRWA 10T SRAM cell, respectively. The proposed SRAM cell is designed at a 22 nm CMOS technology node and verified in the Synopsys Custom compiler. MC simulation results are monitored on Synopsys Cosmo-scope wave viewer.

<span lang="EN-US">This paper presents a reconfigurable negative bit line collapsed supply (RNBLCS) write driver circuit for the 9T Schmitt trigger-based static random-access memory (SRAM) cell (9T-ST), significantly improving write performance for real-time memory applications. In deep sub-micron technology, increasing device parameter deviations significantly reduce SRAM cells' write-ability. The proposed RNBLCS write-assist driver for 9T-ST SRAM cell has 0.84×, 0.48×, 0.27× optimized write access delay and 1.05×, 1.08×, 1.19× improvement in write static noise margin (WSNM), 1.05×, 1.13×, and 1.39× improvement in write margin (WM), 0.96×, 0.89× and 0.72× minimum write trip-point (WTP) from transient-negative bit line (Tran-NBL), capacitive charge sharing (CCS), and conventional write circuits respectively. The proposed RNBLCS is functionally verified using a synopsys custom compiler with a 16 nm BSIM4 model card for bulk complementary metal-oxide semiconductor (</span><span lang="EN-US">CMOS).</span>

No abstract

No abstract