No abstract

No abstract

A fully automated anthrax smoke detector (ASD) has been developed and tested. The ASD is intended to serve as a cost effective front-end monitor for anthrax surveillance systems. The principle of operation is based on measuring airborne endospore concentrations, where a sharp concentration increase signals an anthrax attack. The ASD features an air sampler, a thermal lysis unit, a syringe pump, a time-gated spectrometer, and endospore detection chemistry comprised of dipicolinic acid (DPA)-triggered terbium ion (Tb(3+)) luminescence. Anthrax attacks were simulated using aerosolized Bacillus atrophaeus spores in fumed silica, and corresponding Tb-DPA intensities were monitored as a function of time and correlated to the number of airborne endospores collected. A concentration dependence of 10(2)-10(6) spores/mg of fumed silica yielded a dynamic range of 4 orders of magnitude and a limit of detection of 16 spores/L when 250 L of air were sampled. Simulated attacks were detected in less than 15 min.

The aim of this project is the development of a noninvasive technique based on LED multispectral imaging (MSI) for monitoring the conservation state of the Dead Sea Scrolls (DSS) collection. It is well-known that changes in the parchment reflectance drive the transition of the scrolls from legible to illegible. Capitalizing on this fact, we will use spectral imaging to detect changes in the reflectance before they become visible to the human eye. The technique uses multivariate analysis and statistical process control theory. The present study was carried out on a "sample" parchment of calfskin. The monitoring of the surface of a commercial modern parchment aged consecutively for 2 h and 6 h at 80 °C and 50% relative humidity (ASTM) was performed at the Imaging Lab of the Library of Congress (Washington, DC, U.S.A.). MSI is here carried out in the vis-NIR range limited to 1 μm, with a number of bands of 13 and bandwidths that range from about 10 nm in UV to 40 nm in IR. Results showed that we could detect and locate changing pixels, on the basis of reflectance changes, after only a few "hours" of aging.

Experimental results are presented for a computed tomography imaging spectrometer (CTIS) with imposed spatial-spectral modulation on the image scene. This modulation structure on the CTIS tomographic dispersion created substantial gains in spectral reconstruction resolution after standard iterative, nonlinear, inversion techniques were used. Modulation limits system ambiguities, so high-frequency spectral and low-frequency spatial scene data could be recovered. The results demonstrate how spatial modulation acts as a high-frequency spectral deconvolver for the snapshot hyperspectral imager technology.