No abstract

Urban green infrastructure significantly influences the functioning of a city and the comfort of its residents. Lawns are an essential element of public greenery. They represent a live component, and if they are lacking, of low quality, or neglected, this will cause major problems in the urban environment. The vegetation structure of urban grassy areas changes under the influence of different management methods used for their maintenance. The main goal of this study was to evaluate the species diversity of urban lawns and to determine the influence of this vegetation on factors based on the representation of the species found. Three sites with urban lawns were chosen in a built-up city area where different types of vegetation management were applied: Typical management, in which grassy areas are mowed twice a year; intensive management, in which lawns are mowed several times a year and the biomass is removed; and extensive management, in which lawns are mowed irregularly, once a year at most, and the biomass is left unevenly on the site. Extensive management and unkempt urban grassy areas represent a high risk of fire due to the presence of plant species that produce great amounts of biomass. Combined with dry and warm weather, the dead biomass can lead to outbreaks of fire. Extensive management of urban grassy areas brings some benefits, such as lower maintenance costs and increased biodiversity and bioretention. On the other hand, intensive management reduces the risk of fire and the biodiversity of the plant community. Attention should be paid to the composition of vegetative species and their functions that could threaten the safety of residents, with the risk of fire being one of them. However, the vegetation biomass of grassy areas affected by management practices is only a precondition for the risk of fire because weather and drought occurrence play important roles as well.

Surface monitoring of landfills is crucial not only during their operation but also for later land restoration and development. Measurements concern environmental factors, such as leachate, migration of pollutants to water, biogas, and atmospheric emissions, and geotechnical factors, such as stability and subsidence. Landfill subsidence can be measured using modern surveying techniques. Modern measurement methods for landfill body displacement monitoring and their control after restoration and adaptation as recreational areas include terrestrial laser scanning (TLS), and scanning and low-altitude photogrammetric measurements from an unmanned aerial vehicle (UAV). The acquired measurement data in the form of 3D point clouds should be referenced to the local control network to enable a comprehensive analysis of data acquired using various techniques, including geotechnical sensors such as benchmarks, piezometers, and inclinometers. This study discusses the need for surface monitoring of municipal solid waste (MSW) landfills. A properly 3-D mapped landfill mass is the basis for ensuring the geotechnical safety of the restored landfill. Based on archival data and current measurements of the Radiowo landfill (Poland), this study compares the advantages and limitations of the following measurement techniques: linear and angular measurements, satellite measurements, TLS, and UAV scanning and photogrammetry, considering specific conditions of the location and vegetation of the landfill. Solutions for long-term monitoring were proposed, considering the cost and time resolution necessary for creating a differential model of landfill geometry changes.

Geodetic monitoring of deformation has an important role in ensuring the safety of geotechnical objects by monitoring of not exceeding the critical states defined for slope stability and monitoring the uniformity of the object settlement process. A special case of such objects are landfills built of various anthropogenic materials. Heterogeneous building material causes increased values of displacements in relation to other geotechnical objects and requires that measurement works be carried out throughout the entire life cycle of the landfill: both in the exploitation phase, during the reclamation period and in the post-exploitation phase. This study presents the methodology of geodetic measurements of deformation of geotechnical objects on the example of the Radiowo landfill and the results of this type of measurements carried out for 30 years on this object. The analysis of the literature has also shown that, in addition to the commonly used geodetic methods, it is possible to use modern measurement methods such as laser scanning and photogrammetry, which are more and more often successfully used in the measurement of this type of structures. These methods can be an interesting alternative in measuring the displacement of landfills or constitute their perfect supplement.

Displacements of landfills play an important role in the reclamation process and geotechnical safety improvement of such sites. Landfill settlements are defined as a vertical displacement of waste body due to compression, degradable nature of the waste, and creep phenomenon of the waste particles. Waste composition is more diverse than natural soil. Thus, it has to be properly placed and compacted since the landfill body will continuously settle down. Several models of the landfill displacement estimation have already been developed. The aim of the present study was: (i) to review the methods of landfill settlements computation and (ii) to propose the model allowing landfill body displacements simulation based on monitoring datasets applying a Global Navigation Satellite Systems (GNSS) measurement. The new model employs Gauss-Newton iteration and Runge-Kutta methods to estimate landfill surface displacements. The objectives were to analyse and mathematically describe the landfill body displacements. The GNSS geodetic survey and computations allowed concluding that the landfill body has been transformed over the years. The results revealed that the curves of waste displacement are in agreement with the measured total displacement of the landfill, and all curves corresponding to waste displacement are perpendicular to the active edge of the landfill. In the period of a maximum of 4.5 years after the waste deposition with a layer of up to 16.2 m thickness, the phenomenon of expansion was observed, which then disappears, and more settlement occurs due to the gravity of upper layers. The analysed landfill as a whole does not experience significant displacements. Neither of the slope failures are observed, even for large inclination.