Abstract:In the application of rail transit vehicles, when using typical wireless power transfer (WPT) systems with series-series (SS) compensation supply power for supercapacitors, the output current is in an approximately inverse relationship with the duty cycle in a wide range. This renders the typical buck circuit control inappropriate. In order to help resolve the above issues, this paper designs inductor/capacitor/capacitor (LCC) compensation with new compensation parameters, which can achieve an adjustable quasi-constant voltage from the input of the inverter to the output of the rectifier. In addition, the two-port network method is used to analyze the resonant compensation circuit. The analysis shows that LCC compensation is more suitable for the WPT system using the supercapacitor as the energy storage device. In the case of LCC compensation topology combined with the charging characteristics of the supercapacitor, an efficient charging strategy is designed, namely first constant current charging, followed by constant power charging. Based on the analysis of LCC compensation, the system has an optimal load, by which the system works at the maximum efficiency point. Combined with the characteristics of the constant voltage output, the system can maintain high efficiency in the constant power stage by making constant output power the same as the optimal power point. Finally, the above design is verified through experiments.

In this paper, the integration benefits from cryogenic NMOS source drain extension implants on a state-of-the-art 28 nm logic flow are demonstrated and discussed. It is shown that device benefits, such as improved short channel effect, drain-induced barrier lowering and static random access memory yield improvement, can be achieved via damage engineering and enhanced dopant halo activation.

Flexible antennas based on the printed flexible electronic technology are of great interest for important applications in wireless communication systems due to their distinctive features over traditional rigid-based antennas. The ultrawideband (UWB), notch characteristics, and bending capabilities of such antennas are crucial for flexible and wearable applications. Currently, only a few are focused on the printed flexible electronics technology with printable ink materials for UWB antenna applications. In addition, flexible UWB antennas with triple-notch characteristics and good bending performance are rarely reported. Thus, there is a need to make advances in this area. Here, we describe the application of a printable silver nanoparticlebased ink for rapidly fabricating an antenna with bendable and triple-notch characteristics designed for UWB communication systems. The ink, composed of monodisperse silver nanoparticles, isopropanol, and ethyl glycol, can easily produce favorable conductive patterns at a sintering temperature below 130 °C after inkjet printing. The antenna is designed on a flexible polyethylene terephthalate (PET) substrate and has a moderate size of 27 mm × 38 mm × 0.12 mm. It operates at a frequency range of 1.9−10.75 GHz, which covers the desired UWB frequency band. By loading a "U"-like slot and two "C"-like slots on the radiating patch, band rejections were generated at 3.2−3.8, 5.3−6.2, and 7.8−8.5 GHz, shielding the interference from world interoperability for microwave access, wireless local area networks, and X uplink bands. The bending results show that the antenna retains good UWB and triple-notch performance even after bending along the Y-or X-axis for different degrees. An antenna prototype was finally fabricated by inkjet printing of the silver nano ink on the PET substrate, exhibiting the desired notch characteristics and excellent bendability. The fabricated antenna prototype proved the feasibility of use as a flexible device at an ultrawide frequency band. The research provides a design guide for flexible antennas with notch features toward flexible and wearable electronics.

No abstract

No abstract