The postfabrication modification of the group delay in silicon-photonic waveguides is proposed, simulated and demonstrated experimentally. Group delay variations of 2% are achieved through photo-induced changes to an upper cladding layer of photosensitive As₁₀Se₉₀ chalcogenide glass. The illumination of the cladding layer by intense green light for a few seconds leads to mass transfer and removal of material, away from irradiated regions. The phenomenon is employed in the localized removal of the cladding layer from above the core region of a silicon-on-insulator waveguide, thereby modifying its phase and group delays. Using the proposed method, the free spectral range of a chalcogenide-on-silicon Mach-Zehnder interferometer was modified by 1%. The technique is applicable to the postfabrication adjustment of the frequency response of silicon-photonic filters, comprised of several cascaded elements.

The stable one-time tuning of silicon-photonic directional couplers, over a broad range of coupling ratios, is achieved through the selective photo-removal of an upper cladding layer of chalcogenide glass. Analysis shows that the coupling coefficient per unit length between two parallel fully-etched silicon waveguides may be changed by 45%. The power coupling ratio of a 50 µm-long directional coupler between two such waveguides may be tuned arbitrarily between 0 and 1, with weak residual wavelength dependence. Smaller modifications in the coupling coefficient per unit length are obtained between two partially-etched ridge waveguides, on the order of 10%. The proposed procedure is demonstrated in the post-fabrication tuning of transmission notches of a race-track resonator, from over-coupling through critical coupling to weak coupling. The extinction ratio of specific resonances is varied between 4 and 40 dB. The coupling ratio of a tuned device remains stable following three months of storage.

High quality imaging through sub-millimeter endoscopic probes provides clinicians with valuable diagnostics capabilities in hard to reach locations within the body. Spectrally encoded endoscopy (SEE) has been shown promising for such task; however, challenging probe fabrication and high speckle noise had prevented its testing in in vivo studies. Here we demonstrate a novel miniature SEE probe which incorporates some of the recent progress in spectrally encoded technology into a compact and robust endoscopic system. A high-quality miniature diffraction grating was fabricated using automated femtosecond laser cutting from a large bulk grating. Using one spectrally encoded channel for imaging and a separate channel for incoherent illumination, the new system has large depth of field, negligible back reflections and well controlled speckle noise which depends on the core diameter of the illumination fiber. Moreover, by using a larger imaging channel, higher groove density grating, shorter wavelength and broader spectrum, the new endoscopic system now allow significant improvements in almost all imaging parameter compared to previous systems, through an ultra-miniature endoscopic probe.

No abstract

A method for fast non-scanning remote photoacoustic imaging is presented and experimentally demonstrated. The approach is based on speckle contrast measurement, proceeding the previously developed method for speckle contrast based photoacoustic detection. This previously developed method is now presented without the need for raster scanning of the sample, an advantage rarely found in optical photoacoustic detection, and offers 50 times faster as well as a simpler remote photoacoustic scheme in respect to interferometric available solutions.