No abstract

No abstract

Organic semiconductor distributed feedback (DFB) lasers are of interest as external or chip-integrated excitation sources in the visible spectral range for miniaturized Raman-on-chip biomolecular detection systems. However, the inherently limited excitation power of such lasers as well as oftentimes low analyte concentrations requires efficient Raman detection schemes. We present an approach using surface-enhanced Raman scattering (SERS) substrates, which has the potential to significantly improve the sensitivity of on-chip Raman detection systems. Instead of lithographically fabricated Au/Ag-coated periodic nanostructures on Si/SiO2 wafers, which can provide large SERS enhancements but are expensive and time-consuming to fabricate, we use low-cost and large-area SERS substrates made via laser-assisted nanoreplication. These substrates comprise gold-coated cyclic olefin copolymer (COC) nanopillar arrays, which show an estimated SERS enhancement factor of up to ∼ 10(7). The effect of the nanopillar diameter (60-260 nm) and interpillar spacing (10-190 nm) on the local electromagnetic field enhancement is studied by finite-difference-time-domain (FDTD) modeling. The favorable SERS detection capability of this setup is verified by using rhodamine 6G and adenosine as analytes and an organic semiconductor DFB laser with an emission wavelength of 631.4 nm as the external fiber-coupled excitation source.

No abstract

Cathode material for Li-ion batteries can be synthesised by r.f. magnetron sputtering of LiCoO 2 targets in a pure Ar plasma. This technique is suitable for large-scale implementation in foil coating set-ups. By choosing the process parameters and by employing post heat treatment nanocrystalline, stoichiometrical LiCoO 2 films can be fabricated which exhibit the desired high temperature phase. The determination of the elementary composition is possible by optical emission spectroscopy including plasma stimulation and carrier gas temperature extraction. The proof of crystal structure is carried out by X-ray diffraction and Raman spectroscopy. Heat treatment can be conventionally realised in a furnace or by laser impact. With regard to increasing the power density, the surface of the cathode material can be enhanced six-fold by laser-assisted surface patterning.