Sandau, I, Chaabene, H, and Granacher, U. Validity and reliability of a snatch pull test to model the force-velocity relationship in male elite weightlifters.

The load-depended loss of vertical barbell velocity at the end of the acceleration phase limits the maximum weight that can be lifted. Thus, the purpose of this study was to analyze how increased barbell loads affect the vertical barbell velocity in the sub-phases of the acceleration phase during the snatch. It was hypothesized that the load-dependent velocity loss at the end of the acceleration phase is primarily associated with a velocity loss during the 1st pull. For this purpose, 14 male elite weightlifters lifted seven load-stages from 70–100% of their personal best in the snatch. The load–velocity relationship was calculated using linear regression analysis to determine the velocity loss at 1st pull, transition, and 2nd pull. A group mean data contrast analysis revealed the highest load-dependent velocity loss for the 1st pull (t = 1.85, p = 0.044, g = 0.49 [−0.05, 1.04]) which confirmed our study hypothesis. In contrast to the group mean data, the individual athlete showed a unique response to increased loads during the acceleration sub-phases of the snatch. With the proposed method, individualized training recommendations on exercise selection and loading schemes can be derived to specifically improve the sub-phases of the snatch acceleration phase. Furthermore, the results highlight the importance of single-subject assessment when working with elite athletes in Olympic weightlifting.

The aim of this study is to monitor short-term seasonal development of young Olympic weightlifters' anthropometry, body composition, physical fitness, and sport-specific performance. Fifteen male weightlifters aged 13.2 ± 1.3 years participated in this study. Tests for the assessment of anthropometry (e.g., body-height, body-mass), body-composition (e.g., lean-body-mass, relative fat-mass), muscle strength (grip-strength), jump performance (drop-jump (DJ) height, countermovement-jump (CMJ) height, DJ contact time, DJ reactive-strength-index (RSI)), dynamic balance (Y-balance-test), and sport-specific performance (i.e., snatch and clean-and-jerk) were conducted at different time-points (i.e., T1 (baseline), T2 (9 weeks), T3 (20 weeks)). Strength tests (i.e., grip strength, clean-and-jerk and snatch) and training volume were normalized to body mass. Results showed small-to-large increases in body-height, body-mass, lean-body-mass, and lower-limbs lean-mass from T1-to-T2 and T2-to-T3 (∆0.7-6.7%; 0.1 ≤ d ≤ 1.2). For fat-mass, a significant small-sized decrease was found from T1-to-T2 (∆13.1%; d = 0.4) and a significant increase from T2-to-T3 (∆9.1%; d = 0.3). A significant main effect of time was observed for DJ contact time (d = 1.3) with a trend toward a significant decrease from T1-to-T2 (∆-15.3%; d = 0.66; p = 0.06). For RSI, significant small increases from T1-to-T2 (∆9.9%, d = 0.5) were noted. Additionally, a significant main effect of time was found for snatch (d = 2.7) and clean-and-jerk (d = 3.1) with significant small-to-moderate increases for both tests from T1-to-T2 and T2-to-T3 (∆4.6-11.3%, d = 0.33 to 0.64). The other tests did not change significantly over time (0.1 ≤ d ≤ 0.8). Results showed significantly higher training volume for sport-specific training during the second period compared with the first period (d = 2.2). Five months of Olympic weightlifting contributed to significant changes in anthropometry, body-composition, and sport-specific performance. However, hardly any significant gains were observed for measures of physical fitness. Coaches are advised to design training programs that target a variety of fitness components to lay an appropriate foundation for later performance as an elite athlete.

Background: The prediction of one repetition-maximum (1RM) performance from specific tests is highly relevant for the monitoring of training in weightlifting. Therefore, this study aimed at examining the predictive validity of the theoretical 1RM snatch (snatchth) computed from the two-point snatch pull force-velocity relationship (FvR2) to determine actual snatch 1RM performance in elite weightlifters. Methods: Eight (three female, five male) elite weightlifters carried out a 1RM snatch test followed by a snatch pull test with loads of 80% and 110% of the previously determined 1RM snatch. Barbell kinematics were determined for all lifts using video-tracking. From the snatch pull barbell kinematics, the snatch pull FvR2 was modeled and the snatchth was calculated. Results: The main findings indicated a non-significant (p = 0.706) and trivial (d = 0.01) mean difference between the actual 1RM snatch performance and the snatchth. Both measures showed an extremely large correlation (r = 0.99). The prediction accuracy of the actual 1RM snatch from snatchth was 0.2 ± 1.5 kg (systematic bias ± standard deviation of differences). Conclusions: This study provides a new approach to estimate 1RM snatch performance in elite weightlifters using the snatch pull FvR2. The results demonstrate that the snatchth-model accurately predicts 1RM snatch performance.

Die Schnellkraftfähigkeit ist ein leistungsbegrenzender Faktor in den Wettkampfübungen des Gewichthebens. Zur Erhöhung der Schnellkraftfähigkeit im Gewichtheben werden im Trainingsprozess spezifische Trainingsübungen genutzt. Dieses Buch stellt einen methodischen Ansatz zu Beurteilung der potenziellen Wirkung einer spezifischen Trainingsübung auf die Wettkampfübung dar. Aus den gewonnen Ergebnissen werden praktische Empfehlungen für das Training im Gewichtheben abgeleitet und Vorschläge für die Optimierung der Trainingsgestaltung gegeben.