The use of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) in electrodes and electrical circuits presents a number of challenges that are yet to be overcome, foremost amongst which are its relatively low conductivity, low coatability on hydrophobic substrates, and decreased conductivity at large strains. With this in mind, this study suggests a simple way to simultaneously address all of these issues through the addition of a small amount of a nonionic surfactant (Triton X-100) to commercial PEDOT:PSS solutions. This surfactant is shown to considerably reduce the surface tension of the PEDOT:PSS solution, thus permitting conformal coatings of PEDOT:PSS thin film on a diverse range of hydrophobic substrates. Furthermore, this surfactant induces the formation of PEDOT nanofibrils during coating, which led to the high conductivity values and mechanical stability at large strains (ε=10.3%). Taking advantage of the superior characteristics of these PEDOT:PSS thin films, a highly flexible polymer solar cell was fabricated. The power conversion efficiency of this solar cell (3.14% at zero strain) was preserved at large strains (ε=7.0%).

Stretchable alternating-current electroluminescent (ACEL) devices are required due to their potential in wearable, biomedical, e-skin, robotic, lighting, and display applications; however, one of the main hurdles is to achieve uniform electroluminescence with an optimal combination of transparency, conductivity, and stretchability in electrodes. We therefore propose a fabrication scheme involving strategically combining two-dimensional graphene layers with a silver nanowire (Ag NW)-embedded PEDOT:PSS film. The developed hybrid electrode overcomes the limitations of commonly known metallic NWs and ionic conductorbased electrodes for ACEL applications. Furthermore, the potential of the hybrid electrode is realized in demonstrating large-area stretchable ACEL devices composed of an 8 × 8 passive array. The prototype ACEL passive array demonstrates efficient and uniform electroluminescence under high levels of mechanical deformation such as bending, rolling, twisting, and stretching.

Application-oriented patterned growth of transition metal dichalcogenides (TMDCs) and their heterojunctions is of critical importance for sophisticated, customized two-dimensional (2D) electronic and optoelectronic devices; however, it is still difficult to fabricate these patterns in a simple, clean, and high controllability manner without using optical lithography. Here, we report the direct synthesis of patterned MoS2 and graphene-MoS2 heterojunctions via selective plasma treatment of a SiO2/Si substrate and chemical vapor deposition of MoS2. This method has multiple merits, such as simple steps, a short operating time, easily isolated MoS2 layers with clean surfaces and controllable locations, shapes, sizes and thicknesses, which enable their integration into the device structure without using a photoresist. In addition, we demonstrate the direct growth of patterned graphene-MoS2 heterojunctions for the fabrication of transistor. This study reveals a novel method to fabricate and use patterned MoS2 and graphene-MoS2 heterojunctions, which could be generalized to the rational design of other 2D materials, heterojunctions and devices in the future.

TOPOT may be an effective and safe approach for robotic thyroid surgery.

Robotic thyroidectomy using BABA may be a technically feasible and safe procedure comparable to conventional open surgery especially in node-negative patients.