Computed tomography (CT) and ultrasonography (US) are ideally suited for demonstrating urachal remnant diseases. A patent urachus is demonstrated at longitudinal US and occasionally at CT as a tubular connection between the anterosuperior aspect of the bladder and the umbilicus. An umbilical-urachal sinus manifests at US as a thickened tubular structure along the midline below the umbilicus. A vesicourachal diverticulum is usually discovered incidentally at axial CT, appearing as a midline cystic lesion just above the anterosuperior aspect of the bladder. At US, it manifests as an extraluminally protruding, fluid-filled sac that does not communicate with the umbilicus. Urachal cysts manifest at both modalities as a noncommunicating, fluid-filled cavity in the midline lower abdominal wall located just beneath the umbilicus or above the bladder. Both infected urachal cysts and urachal carcinomas commonly display increased echogenicity at US and thick-walled cystic or mixed attenuation at CT, making it difficult to differentiate between them. Percutaneous needle biopsy or fluid aspiration is usually needed for diagnosis and therapeutic planning. Nevertheless, CT and US can help identify most disease entities originating from the urachal remnant in the anterior abdominal wall. Understanding the anatomy and the imaging features of urachal remnant diseases is essential for correct diagnosis and proper management.

No abstract

One of the most important physical factors related to the thermal conductivity of composites filled with graphene nanoplatelets (GNPs) is the dimensions of the GNPs, that is, their lateral size and thickness. In this study, we reveal the relationship between the thermal conductivity of polymer composites and the realistic size of GNP fillers within the polymer composites (measured using three-dimensional (3D) non-destructive micro X-ray CT analysis) while minimizing the effects of the physical parameters other than size. A larger lateral size and thickness of the GNPs increased the likelihood of the matrix-bonded interface being reduced, resulting in an effective improvement in the thermal conductivity and in the heat dissipation ability of the composites. The thermal conductivity was improved by up to 121% according to the filler size; the highest bulk and in-plane thermal conductivity values of the composites filled with 20 wt% GNPs were 1.8 and 7.3 W/m·K, respectively. The bulk and in-plane thermal conductivity values increased by 650 and 2,942%, respectively, when compared to the thermal conductivity values of the polymer matrix employed (0.24 W/m·K).

Understanding of the hemodynamic changes caused by these small shunts can aid in the interpretation of vascular imaging findings.

The drying process of graphene-polymer composites fabricated by solution-processing for excellent dispersion is time consuming and suffers from a restacking problem. Here, we have developed an innovative method to fabricate polymer composites with well dispersed graphene particles in the matrix resin by using solvent free powder mixing and in-situ polymerization of a low viscosity oligomer resin. We also prepared composites filled with up to 20 wt% of graphene particles by the solvent free process while maintaining a high degree of dispersion. The electrical conductivity of the composite, one of the most significant properties affected by the dispersion, was consistent with the theoretically obtained effective electrical conductivity based on the mean field micromechanical analysis with the Mori-Tanaka model assuming ideal dispersion. It can be confirmed by looking at the statistical results of the filler-to-filler distance obtained from the digital processing of the fracture surface images that the various oxygenated functional groups of graphene oxide can help improve the dispersion of the filler and that the introduction of large phenyl groups to the graphene basal plane has a positive effect on the dispersion.