Osteoporosis is a medical condition affecting men and women of different age groups and populations. The compromised bone quality caused by this disease represents an important challenge when a surgical procedure (e.g., spinal fusion) is needed after failure of conservative treatments. Different pedicle screw designs and instrumentation techniques have been explored to enhance spinal device fixation in bone of compromised quality. These include alterations of screw thread design, optimization of pilot hole size for non-self-tapping screws, modification of the implant's trajectory, and bone cement augmentation. While the true benefits and limitations of any procedure may not be realized until they are observed in a clinical setting, axial pullout tests, due in large part to their reproducibility and ease of execution, are commonly used to estimate the device's effectiveness by quantifying the change in force required to remove the screw from the body. The objective of this investigation is to provide an overview of the different pedicle screw designs and the associated surgical techniques either currently utilized or proposed to improve pullout strength in osteoporotic patients. Mechanical comparisons as well as potential advantages and disadvantages of each consideration are provided herein.

Burn patients are often plagued by fever due to the inflammatory nature of their injuries as well as the normal postoperative systemic inflammatory response syndrome. One etiology for fever, often not initially considered, is drug-induced fever. A rare cause of drug-induced fever is heparin with only one documented case reported in the literature. We present a case of heparin-induced fever in a patient who experienced a 32% total BSA friction burn after a motorcycle crash.

Object Through in vitro biomechanical testing, the authors compared the performance of a vertically expandable lateral lumbar interbody cage (EC) under two different torque-controlled expansions (1.5 and 3.0 Nm) and with respect to an equivalent lateral lumbar static cage (SC) with and without pedicle screw fixation. Methods Eleven cadaveric human L2–3 segments were evaluated under the following conditions: 1) intact; 2) discectomy; 3) EC under 1.50 Nm of torque expansion (EC-1.5Nm); 4) EC under 3.00 Nm of torque expansion (EC-3.0Nm); 5) SC; and 6) SC with a bilateral pedicle screw system (SC+BPSS). Load-displacement behavior was evaluated for each condition using a combination of 100 N of axial preload and 7.5 Nm of torque in flexion and extension (FE), lateral bending (LB), and axial rotation (AR). Range of motion (ROM), neutral zone stiffness (NZS), and elastic zone stiffness (EZS) were statistically compared among conditions using post hoc Wilcoxon signed-rank comparisons after Friedman tests, with a significance level of 0.05. Additionally, any cage height difference between interbody devices was evaluated. When radiographic subsidence was observed, the specimen's data were not considered for the analysis. Results The final cage height in the EC-1.5Nm condition (12.1 ± 0.9 mm) was smaller (p < 0.001) than that in the EC-3.0Nm (13.9 ± 1.1 mm) and SC (13.4 ± 0.8 mm) conditions. All instrumentation reduced (p < 0.01) ROM with respect to the injury and increased (p ≤ 0.01) NZS in flexion, extension, and LB as well as EZS in flexion, LB, and AR. When comparing the torque expansions, the EC-3.0Nm condition had smaller (p < 0.01) FE and AR ROM and greater (p ≤ 0.04) flexion NZS, extension EZS, and AR EZS. The SC condition performed equivalently (p ≥ 0.10) to both EC conditions in terms of ROM, NZS, and EZS, except for EZS in AR, in which a marginal (p = 0.05) difference was observed with respect to the EC-3.0Nm condition. The SC+BPSS was the most rigid construct in terms of ROM and stiffness, except for 1) LB ROM, in which it was comparable (p = 0.08) with that of the EC-1.5Nm condition; 2) AR NZS, in which it was comparable (p > 0.66, Friedman test) with that of all other constructs; and 3) AR EZS, in which it was comparable with that of the EC-1.5Nm (p = 0.56) and SC (p = 0.08) conditions. Conclusions A 3.0-Nm torque expansion of a lateral interbody cage provides greater immediate stability in FE and AR than a 1.5-Nm torque expansion. Moreover, the expandable device provides stability comparable with that of an equivalent (in size, shape, and bone-interface material) SC. Specifically, the SC+BPSS construct was the most stable in FE motion. Even though an EC may seem a better option given the minimal tissue disruption during its implantation, there may be a greater chance of endplate collapse by over-distracting the disc space because of the minimal haptic feedback from the expansion.

The results suggest that the application of tramadol and diclofenac during the first 48 hours after lumbar microdiscectomy results in a reduction in postoperative pain without complications. We suggest that the use of this combination can be a beneficial adjunct to lumbar disc surgery.

Introduction Exfoliative skin conditions such as Steven Johnson Syndrome (SJS)/toxic epidermal necrolysis (TEN) and other significant drug related reactions are complex medical conditions that provide a challenge to the burn surgeon, especially with regards to local wound care. Various modalities of wound care require frequent dressing changes; however, these changes put the patient through significant pain and potentially harmful experiences that could lead to worse skin exfoliation, scarring and pigmentation changes. As part of our burn unit, we have created a dressing utilizing silver impregnated nylon sheets that limits the amount of wound care performed and therefore the amount of potential exfoliative damage. Methods We have employed this means of dressing in all our Steven Johnson patients with significant open or blistered areas. We performed a retrospective analysis looking at our patients who were admitted with Steven Johnson Syndrome/toxic epidermal necrolysis or other exfoliative skin disorder over the last 7 years. We had 52 patients who ranged from having 2-100% of skin involved with significant blistering or exposed areas. The suit is made specific to the patient as each area is measured and the silver sheets are formed to the patient and secured in place. The silver sheets are saturated with sterile water and rewet with saline every four hours and changed every three days. Results By utilizing these silver-based dressings, we have limited the amount of dressing changes and concomitant pain for patients while also limiting skin infections to only 1 out of our 52 patients. For blisters on the face, a local antibiotic ointment was used; and once the skin lesions had healed, a moisturizing lotion was used. Conclusions Steven Johnson Syndrome and other exfoliative skin conditions require significant wound care. By minimizing dressing changes, one can lessen the pain to patients and by utilizing dressings that are infused with silver, one can also potentially decrease the risk for infection as was seen in our patient population.