No abstract

Due to the sharp and corrosion-prone features of steel fibers, there is a demand for ultra-high-performance concrete (UHPC) reinforced with nonmetallic fibers. In this paper, glass fiber (GF) and the high-performance polypropylene (HPP) fiber were selected to prepare UHPC, and the effects of different fibers on the compressive, tensile and bending properties of UHPC were investigated, experimentally and numerically. Then, the damage evolution of UHPC was further studied numerically, adopting the concrete damaged plasticity (CDP) model. The difference between the simulation values and experimental values was within 5.0%, verifying the reliability of the numerical model. The results indicate that 2.0% fiber content in UHPC provides better mechanical properties. In addition, the glass fiber was more significant in strengthening the effect. Compared with HPP-UHPC, the compressive, tensile and flexural strength of GF-UHPC increased by about 20%, 30% and 40%, respectively. However, the flexural toughness indexes I5, I10 and I20 of HPP-UHPC were about 1.2, 2.0 and 3.8 times those of GF-UHPC, respectively, showing that the toughening effect of the HPP fiber is better.

No abstract

No abstract

Valve as an important part of the gas distribution mechanism, is an crucial part of the engine. When the engine works, the valve is subjected to high temperature, high impact, frictional wear and corrosion and other harsh working conditions, and the reliable and durable valve has an important impact on the safety and reliability of the engine. In this paper, a model of four-stroke marine diesel engine valve is used as the research object, and the intake valve set and exhaust valve set models are established respectively. Heat transfer simulation and failure analysis of inlet and exhaust valves of different structures and materials under different operating conditions were carried out using finite element analysis. The results show that the different valve structures and manufacturing materials have different effects on the reliability of the valves; Changing the valve structures and choosing different valve manufacturing materials have a greater impact on the heat transfer and deformation, thus affecting the overall reliability of the valves.