Theoretical calculations predict that by coupling an exothermic chemical reaction with a nanotube or nanowire possessing a high axial thermal conductivity, a self-propagating reactive wave can be driven along its length. Herein, such waves are realized using a 7-nm cyclotrimethylene trinitramine annular shell around a multiwalled carbon nanotube and are amplified by more than 10(4) times the bulk value, propagating faster than 2 m s(-1), with an effective thermal conductivity of 1.28+/-0.2 kW m(-1) K(-1) at 2,860 K. This wave produces a concomitant electrical pulse of disproportionately high specific power, as large as 7 kW kg(-1), which we identify as a thermopower wave. Thermally excited carriers flow in the direction of the propagating reaction with a specific power that scales inversely with system size. The reaction also evolves an anisotropic pressure wave of high total impulse per mass (300 N s kg(-1)). Such waves of high power density may find uses as unique energy sources.

No abstract

Exothermic chemical reactions of nitrocellulose are coupled onto thermoelectric zinc oxide (ZnO) layers to generate self-propagating thermopower waves resulting in highly oscillatory voltage output of the order of 500 mV. The peak specific power obtained from ZnO based sources is approximately 0.5 kW kg(-1).

Self-propagating exothermic chemical reactions can generate electrical pulses when guided along a conductive conduit such as a carbon nanotube. However, these thermopower waves are not described by an existing theory to explain the origin of power generation or why its magnitude exceeds the predictions of the Seebeck effect. In this work, we present a quantitative theory that describes the electrical dynamics of thermopower waves, showing that they produce an excess thermopower additive to the Seebeck prediction. Using synchronized, high-speed thermal, voltage, and wave velocity measurements, we link the additional power to the chemical potential gradient created by chemical reaction (up to 100 mV for picramide and sodium azide on carbon nanotubes). This theory accounts for the waves' unipolar voltage, their ability to propagate on good thermal conductors, and their high power, which is up to 120% larger than conventional thermopower from a fiber of all-semiconducting SWNTs. These results underscore the potential to exceed conventional figures of merit for thermoelectricity and allow us to bound the maximum power and efficiency attainable for such systems.

The nonlinear coupling between exothermic chemical reactions and a nanowire or nanotube with large axial heat conduction results in a self-propagating thermal wave guided along the nanoconduit. The resulting reaction wave induces a concomitant thermopower wave of high power density (>7 kW/kg), resulting in an electrical current along the same direction. We develop the theory of such waves and analyze them experimentally, showing that for certain values of the chemical reaction kinetics and thermal parameters, oscillating wavefront velocities are possible. We demonstrate such oscillations experimentally using a cyclotrimethylene-trinitramine/multiwalled carbon nanotube system, which produces frequencies in the range of 400 to 5000 Hz. The propagation velocity oscillations and the frequency dispersion are well-described by Fourier's law with an Arrhenius source term accounting for reaction and a linear heat exchange with the nanotube scaffold. The frequencies are in agreement with oscillations in the voltage generated by the reaction. These thermopower oscillations may enable new types of nanoscale power and signal processing sources.