In the process of urban rail transit construction, underground excavation method is often used in subway station construction. Based on a large number of measured data of Qingdao Metro Line 3, this paper analyzes and studies the ground subsidence law of long-span shallow buried excavation station. The research results show that vertical surface settlement will be caused by the excavation of both sides of the guide hole, but the settlement is relatively small, basically within −10 mm. Large surface settlement will occur during the middle or middle guide hole excavation, with a large settlement up to −30 mm. Through data fitting, it is found that the regression analysis using cubic polynomial of one degree can get better fitting effect. The horizontal surface variation rules of underground excavation stations are affected by the tunnel depth, geological conditions, management level of monitoring units, monitoring layout and monitoring accuracy, and so on. The differences in horizontal surface deformation and settlement between stations are large. Wannianquan Road Station basically conforms to the deformation law of ground settlement trough in Peck, and Junfeng Road Station directly above belongs to the whole subsidence type. This study has accumulated a large number of surface settlement monitoring data, which can provide a certain reference for the subsequent design of similar lines.

Underground excavation techniques are frequently used in subway stations during the construction of urban rail transit. The current study analyzes and investigates the surface settlement and deformation laws of large-span shallow buried underground excavated stations depending on a vast quantity of measured data from the Qingdao Metro Line 3. According to the comprehensive study, obtained results show that: 1) the excavation of pilot tunnels on both sides will result in the longitudinal settlement at the ground surface; however, the settlement will be quite minor, within −10 mm. During the excavation of the middle part of the pilot tunnel, large surface settlement may occur, and the settlement may reach −30 mm, while during the excavation of the lower soil and construction of the station structure, the surface settlement changes insignificantly, and some monitoring points show a sinking trend. 2) Data fitting reveals that regression analysis with a one variable cubic polynomial produces excellent fitting results. In addition, the analysis based on statistical methods reveals that the conditions of the surrounding rock are poor (Class that the arch, and the overall buried depth of the station is not larger than 10 m. 3) Since the surface settlement control standard for large-span boring tunnels is −60 mm, using −48 mm as the warning value is more reasonable. The test conducted in the current study has helped accumulate a large amount of ground settlement monitoring data, which can provide a particular reference for the subsequent design of similar lines.

No abstract