Hydrogen, a clean-burning fuel, is of key importance to various industrial applications, including fuel cells and the aerospace and automotive industries. However, hydrogen gas is odorless, colorless, and highly flammable; thus, appropriate safety protocol implementation and monitoring are essential. Highly sensitive hydrogen-gas leak detection and surveillance systems are needed; additionally, the ability to monitor large areas (e.g., cities) via wireless networks is becoming increasingly important. In this report, we introduce a radio frequency identification (RFID)-based wireless smart-sensor system, composed of a Pt-decorated reduced graphene oxide (Pt_rGO)-immobilized RFID sensor tag and an RFID-reader antenna-connected network analyzer to detect hydrogen gas. The Pt_rGOs, produced using a simple chemical reduction process, were immobilized on an antenna pattern in the sensor tag through spin coating. The resulting Pt_rGO-based RFID sensor tag exhibited a high sensitivity to hydrogen gas at unprecedentedly low concentrations (1 ppm), with wireless communication between the sensor tag and RFID-reader antenna. The wireless sensor tag demonstrated flexibility and a long lifetime due to the strong immobilization of Pt_rGOs on the substrate and battery-independent operation during hydrogen sensing, respectively.
Due to rapid advances in technology which have contributed to the development of portable equipment, highly sensitive and selective sensor technology is in demand. In particular, many approaches to the modification of wireless sensor systems have been studied. Wireless systems have many advantages, including unobtrusive installation, high nodal densities, low cost, and potential commercial applications. In this study, we fabricated radio frequency identification (RFID)-based wireless sensor systems using carboxyl group functionalized polypyrrole (C-PPy) nanoparticles (NPs). The C-PPy NPs were synthesized via chemical oxidation copolymerization, and then their electrical and chemical properties were characterized by a variety of methods. The sensor system was composed of an RFID reader antenna and a sensor tag made from a commercially available ultrahigh frequency RFID tag coated with C-PPy NPs. The C-PPy NPs were covalently bonded to the tag to form a passive sensor. This type of sensor can be produced at a very low cost and exhibits ultrahigh sensitivity to ammonia, detecting concentrations as low as 0.1 ppm. These sensors operated wirelessly and maintained their sensing performance as they were deformed by bending and twisting. Due to their flexibility, these sensors may be used in wearable technologies for sensing gases.
Dopamine (DA), as one of catecholamine family of neurotransmitters, is crucially important in humans owing to various critical effects on biometric system such as brine circuitry, neuronal plasticity, organization of stress responses, and control of cardiovascular and renal organizations. Abnormal level of dopamine in the central nervous system causes several neurological diseases, e.g., schizophrenia, Parkinson's disease, and attention deficit hybperactivity disorder (ADHD)/attention deficit disorder (ADD). In this report, we suggest the fabrication of nonenzyme field effect transistor (FET) sensor composed of immobilized Pt particle decorated conducting-polymer (3-carboxylate polypyrrole) nanoparticles (Pt_CPPy) to detect dopamine. The hybrid nanoparticles (NPs) are produced by means of facile chemical reduction of pristine CPPyNP-contained Pt precursor (PtCl4 ) solution. The Pt_CPPys are then immobilized on an amine-functionalized (-NH2 ) interdigitated-array electrode substrate, through the formation of covalent bonds with amine groups (-CONH). The resulting Pt_CPPy-based FET sensors exhibit high sensitivity and selectivity toward DA at unprecedentedly low concentrations (100 × 10(-15) m) and among interfering biomolecules, respectively. Additionally, due to the covalent bonding involved in the immobilization process, a longer lifetime is expected for the FET sensor.
Field-effect
transistor (FET) devices based on conductive nanomaterials
have been used to develop biosensors. However, development of FET-based
biosensors that allow efficient stability, especially in the gas phase,
for obtaining reliable and reproducible responses remains a challenge.
In this study, we developed a nanodisc (ND)-functionalized bioelectronic
nose (NBN) based on a nickel (Ni)-decorated carboxylated polypyrrole
nanoparticle (cPPyNP)-FET that offers the detection of liquid and
gaseous cadaverine (CV). The TAAR13c, specifically binding to CV,
which is an indicator of food spoilage, was successfully constructed
in NDs. The NBN was fabricated by the oriented assembly of TAAR13c-embedded
NDs (T13NDs) onto the transistor with Ni/cPPyNPs. The NBN showed high
performance in selectivity and sensitivity for the detection of CV,
with excellent stability in both aqueous and gas phases. Moreover,
the NBN allowed efficient measurement of corrupted real-food samples.
It demonstrates the ND-based device can allow the practical biosensor
that provides high stability in the gas phase.
1D tube-in-tube polypyrrole/tin oxide structure was fabricated using electrospinning and vapor deposition polymerization to construct the DMMP gas sensor, which shows high sensitivity and selectivity.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.