In order to increase the power conversion efficiency of organic solar cells, their absorption spectrum should be broadened while maintaining efficient exciton harvesting. This requires the use of multiple complementary absorbers, usually incorporated in tandem cells or in cascaded exciton-dissociating heterojunctions. Here we present a simple three-layer architecture comprising two non-fullerene acceptors and a donor, in which an energy-relay cascade enables an efficient two-step exciton dissociation process. Excitons generated in the remote wide-bandgap acceptor are transferred by long-range Förster energy transfer to the smaller-bandgap acceptor, and subsequently dissociate at the donor interface. The photocurrent originates from all three complementary absorbing materials, resulting in a quantum efficiency above 75% between 400 and 720 nm. With an open-circuit voltage close to 1 V, this leads to a remarkable power conversion efficiency of 8.4%. These results confirm that multilayer cascade structures are a promising alternative to conventional donor-fullerene organic solar cells.

The use of non-fullerene acceptors in organic photovoltaic (OPV) devices could lead to enhanced efficiencies due to increased open-circuit voltage (VOC) and improved absorption of solar light. Here we systematically investigate planar heterojunction devices comprising peripherally substituted subphthalocyanines as acceptors and correlate the device performance with the heterojunction energetics. As a result of a balance between VOC and the photocurrent, tuning of the interface energy gap is necessary to optimize the power conversion efficiency in these devices. In addition, we explore the role of the charge transport layers in the device architecture. It is found that non-fullerene acceptors require adjusted buffer layers with aligned electron transport levels to enable efficient charge extraction, while the insertion of an exciton-blocking layer at the anode interface further boosts photocurrent generation. These adjustments result in a planar-heterojunction OPV device with an efficiency of 6.9% and a VOC above 1 V.

An optimization of several aspects of planar heterojunction solar cells based on boron subnaphthalocyanine chloride (SubNc) as a donor material is presented. The use of hexachlorinated boron subphthalocyanine chloride (Cl6SubPc) as an alternative acceptor to C60 allows for the simultaneous increase of the short‐circuit current, fill factor, and open‐circuit voltage compared to cells with fullerene acceptors. This is due to the complementary absorption of Cl6SubPc versus SubNc, reduced recombination at the heterointerface, and improved energetic alignment. Furthermore, insertion of a thin diindeno[1,2,3‐cd:1′,2′,3′‐lm]perylene (DIP) layer at the anode results in a very significant 60% increase in photocurrent owing to reduced exciton quenching at the anode. The simultaneous improvement of all three solar cell para­meters results in a power conversion efficiency of 6.4% for a non‐fullerene planar heterojunction cell.