No abstract

No abstract

In this paper, a fuzzy expert off-line system has been developed for fault diagnosis in the distribution network based on the structural and functional operation of the relay and circuit breakers. Functional operations (correct operation, false operation and failure to operate) of the relays and circuit breakers are described by fuzzy logic. Input data for the proposed fuzzy expert fault diagnosis system (FDS) are status and time stamps of the alarms, associated with relays and circuit breakers. The diagnostic system from a huge number of alarms sets, logically organizes and quantifies the diagnosis. FDS can diagnose correct operation, false operation and failure to operate of the relays and circuit breakers. Also, it can identify and quantify fault location based on the Hamacher’s operator of a fuzzy union. The additional contribution of this paper is in modeling unknown information using linear fuzzy membership function. Statuses of certain components may be unknown due to telemetry failures or are simply unavailable to the operator and proposed FDS can make diagnosis in such a situation. Developed fuzzy expert FDS is tested on the two examples of faults in real life distribution network

Voltage dips represent a significant power quality problem. The main cause of voltage dips and short-term interruptions is an electrical short circuit that occurs in transmission or distribution networks. Faults in the power system are stochastic by nature and the main cause of voltage dips. As faults in the transmission system can affect more customers than faults in the distribution system, to reduce the number of dips, it is not enough to invest in a small part of the transmission or distribution system. Only targeted investment in the whole (or a large part of the) power system will reduce voltage dips. Therefore, monitoring parts of the power system is very important. The ideal solution would be to cover the entire system so that a power quality (PQ) monitor is installed on each bus, but this method is not economically justified. This paper presents an advanced method for determining the optimal location and the optimal number of voltage dip measuring devices. The proposed algorithm uses a monitor reach area matrix created by short-circuit simulations, and the coefficient of the exposed area. Single-phase and three-phase short circuits are simulated in DIgSILENT software on the IEEE 39 bus test system, using international standard IEC 60909. After determining the monitor reach area matrix of all potential monitor positions, the binary bat algorithm with a coefficient of the exposed area of the system bus is used to minimize the proposed objective function, i.e., to determine the optimal location and number of measuring devices. Performance of the binary bat algorithm is compared to the mixed-integer linear programming algorithm solved by using the GNU Linear Programming Kit (GLPK).

Original scientific paper Recently, there has been made a great effort to include electricity generation from the renewable energy sources into the power system. Random renewable generation creates the imbalance between electricity production and consumption, which requires power plants with fast response or energy storage systems. Generally accepted solution for load balancing is the concept of smart grids and one of the elements of smart grid efficiency is the ability of real-time demand-supply balancing. In this paper, the model of the part of power distribution network of the city of Osijek has been created based on results of the power measurements of total electricity consumption in a family house in Osijek, air conditioning system consumption and PV power plant production. Also, algorithm for real-time load management is proposed. It assumes coordinated control of air conditioning system units depending on the production of PV power plants and electricity consumption of distribution network, in order to reduce peak demand in the distribution network.Keywords: demand side load management; distribution system; photovoltaic generation; real-time demand-supply balancing; smart grid Upravljanje potražnjom u distribucijskom sustavu s fotonaponskim elektranamaIzvorni znanstveni članak Posljednjih godina učinjen je znatan napor na uključivanju obnovljivih izvora električne energije u elektroenergetski sustav. Nepredvidiva prozvodnja obnovljivih izvora električne energije stvara neravnotežu između proizvodnje i potrošnje, što onda zahtijeva elektrane s brzim odzivom, ili sustave skladištenja električne energije. Opće prihvaćeno rješenje za uravnoteženje potrošnje je koncept naprednih mreža, a jedan od elemenata učinkovitosti naprednih mreža je sposobnost za uravnoteženje potražnje i opskrbe u stvarnom vremenu. U ovom radu razvijen je model dijela distribucijske mreže grada Osijeka i to na temelju rezultata mjerenja ukupne potrošnje obiteljske kuće u Osijeku, potrošnje klimatizacijskog uređaja te proizvodnje fotonaponske elektrane. Također, predložen je algoritam za upravljanje potražnjom u stvarnom vremenu. Algoritam sadrži usklađeno upravljanje klimatizacijskim uređajima ovisno o proizvodnji fotonaponskih elektrana te o potrošnji u distribucijskoj mreži, a u cilju snižavanja vršne potražnje u distribucijskoj mreži.Ključne riječi: distribucijski sustav; napredne mreže; proizvodnja fotonaponske elektrane; upravljanje potražnjom; uravnoteženje potražnje i opskrbe u stvarnom vremenu