Abstract:The reaction of wollastonite (CaSiO 3 ) with CO 2 in the presence of aqueous solutions (H 2 O) and varied temperature conditions (296 K, 323 K, and 333 K) was investigated. The educts (CaSiO 3 ) and the products (CaCO 3 and SiO 2 ) were analyzed by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and differential scanning calorimetry with thermogravimetry coupled with a mass spectrometer and infrared spectrometer (DSC-TG/MS/IR). The reaction rate increased significantly at higher temperatures and seemed less dependent on applied pressure. It could be shown that under the defined conditions wollastonite can be applied as a cementitious material for sealing wells considering CCS applications, because after 24 h the degree of conversion from CaSiO 3 to CaCO 3 at 333 K was very high (>90%). As anticipated, the most likely application of wollastonite as a cementitious material in CCS would be for sealing the well after injection of CO 2 in the reservoir.

Sustainable civil construction in the future, besides having low energy consumption and greenhouse gas emissions, must also adopt the principle of reusing wastes generated in the production chain that impact the environment. The aluminum production chain includes refining using the Bayer process. One of the main wastes produced by the Bayer process that has an impact on the environment is fly ash. Geopolymers are cementitious materials with a three-dimensional structure formed by the chemical activation of aluminosilicates. According to studies, some are proving to be appropriate sources of Al and Si in the geopolymerization reaction. The research reported here sought to assess the possibility of reusing fly ash characteristic of the operational temperature and pressure conditions of Bayer process boilers in geopolymer synthesis. Geopolymerization reaction was conducted at an ambient temperature of 30°C, and the activator used was sodium hydroxide (NaOH) 15 molar and sodium silicate (Na2SiO3) alkaline 10 molar. Fly ash and metakaolin were used as sources of Al and Si. XRD, XRF, and SEM Techniques were used for characterizing the raw materials and geopolymers. As a study parameter, the mole ratios utilized followed data from the literature described by Davidovits (year), so that the best results of the geopolymer samples were obtained in the 2.5 to 3.23 range. Resistance to mechanical compression reached 25 MPa in 24 hours of curing and 44 MPa after 28 days of curing at ambient temperature.

Wollastonite can be used as cementitious material, for example in carbon capture and storage (CCS application). The interaction of wollastonite (CS) and pure CO 2 in the presence of H 2 O at temperature (333 K) relevant to injection conditions for CCS were investigated within the joint BMWi research project CLUSTER. The reaction which describes the formation of wollastonite during metamorphism, is reversed. Wollastonite reacts in the presence of CO 2-pressure under aqueous conditions to form calcium carbonate and amorphous silicon oxide. To determine the driving force for this reaction it is important to investigate the impact of CO 2 pressure (p) and temperature (T). The reaction kinetics of the carbonation reaction of wollastonite is strongly dependent to temperature. At 333 K and 2 MPa CO 2 the C CS reaction is fast (≤ 24 h). The chemical composition of wollastonite was analyzed by X-ray fluorescence. To determine the conversion rate of the reaction quantitatively powder X-ray diffraction with Rietveld method were applied. For further application, it is important to understand the specific reactions during the carbonation. Therefore, the influence of different treatments on wollastonite raw material (hydrochloric acid, acetic acid and temperature), before the carbonation experiments, on the carbonation reaction were investigated. The conversion of wollastonite, depending on temperature, was performed successfully. It could be proven, that aragonite acted as seed crystal for further aragonite formation. Furthermore, indications for the formation of aragonite out of amorphous CaCO 3 were observed.

No abstract

No abstract