We have developed software with an interactive user interface that can be used to generate phase holograms for use with spatial light modulators. The program utilizes different hologram design techniques, allowing the user to select an appropriate algorithm. The program can be used to generate multiple beams and can be used for beam steering. We see a major application of the program to be in optical tweezers to control the position, number, and type of optical traps.

Hexagonal arrays of micron sized silica beads have been trapped in three-dimensions within an optical lattice formed by the interference of multiple plane-waves. The optical lattice design with sharply peaked intensity gradients produces a stronger trapping force than the traditionally sinusoidal intensity distributions of other interferometric systems. The plane waves were generated using a single, phase-only, spatial light modulator (SLM), sited near a Talbot image plane of the traps. Compared to conventional optical tweezers, where the traps are formed in the Fourier-plane of the SLM, this approach may offer an advantage in the creation of large periodic array structures. This method of pattern formation may also be applicable to trapping arrays of atoms.

Abstract:Holographic or diffractive optical components are widely implemented using spatial light modulators within optical tweezers to form multiple, and/or modified traps. We show that by further modifying the hologram design to account for residual aberrations, the fidelity of the focused beams can be significantly improved, quantified by a spot sharpness metric. However, the impact this improvement has on the quality of the optical trap depends upon the particle size. For particle diameters on the order of 1 µm, aberration correction can improve the trap performance metric, which is the ratio of the mean square displacement of a corrected trap to an uncorrected trap, in excess of 25%, but for larger particles the trap performance is not unduly affected by the aberrations typically encountered in commercial spatial light modulators.

We present a micropatterning method for the automatic transfer and arbitrary positioning of computer-generated three-dimensional structures within a substrate. The Gerchberg-Saxton algorithm and an electrically addressed spatial light modulator (SLM) are used to create and display phase holograms, respectively. A holographic approach to light manipulation enables arbitrary and efficient parallel photo-patterning. Multiple pyramidal microstructures were created simultaneously in a photosensitive adhesive. A scanning electron microscope was used to confirm successful replication of the desired microscale structures.

Abstract:Holographic or diffractive optical components are widely implemented using spatial light modulators within optical tweezers to form multiple, and/or modified traps. We show that by further modifying the hologram design to account for residual aberrations, the fidelity of the focused beams can be significantly improved, quantified by a spot sharpness metric. However, the impact this improvement has on the quality of the optical trap depends upon the particle size. For particle diameters on the order of 1 µm, aberration correction can improve the trap performance metric, which is the ratio of the mean square displacement of a corrected trap to an uncorrected trap, in excess of 25%, but for larger particles the trap performance is not unduly affected by the aberrations typically encountered in commercial spatial light modulators.