Schlegelová J., Babák V., Holasová M., Konstantinová L., Necidová L., Šišák F., Vlková H., Roubal P., Jaglic Z. (2010): Microbial contamination after sanitation of food contact surfaces in dairy and meat processing plants. Czech J. Food Sci., 28: 450-461.The occurrence of listeria monocytogenes, Salmonella spp., Bacillus cereus, Staphylococcus spp., enterococcus spp., and escherichia coli in raw food materials, food products, and on food contact surfaces after sanitation was investigated during the period of 2005-2006 in three dairy cattle farms (120 samples), one dairy (124 samples), and two meat processing plants (160 samples). A total of 1409 isolates were identified. The epidemiological characterisation and determination of the virulence factors and antimicrobial resistance were performed on selected isolates. The level of bacterial contamination generally decreased during the production process (the contamination of food products was lower than that of raw material). However, the contamination of food contact surfaces was relatively high even after sanitation. Moreover, specific microbiological profiles were found on the inside equipment surfaces in dairy facilities, where genetically closely related multi-resistant strains persisting in biofilm communities may occur as demonstrated for staphylococci. Although the occurrence of potentially significant pathogens was not high, the microorganisms such as l. monocytogenes, Salmonella spp., and shiga-toxin positive e. coli principally contaminated the meat processing plants. B. cereus isolates, among which 76% were positive for diarrhogenic enterotoxin, typically occurred on the inside equipment surfaces and in the heat-treated products.

The aim of this study was to assess the quality of raw cow's milk from an automatic milking system. Samples of milk (48) were analyzed chemically and microbiologically and the somatic cell count, freezing point and inhibitor residues were determined. For comparison purposes, milk analysis data from two farms using conventional machine milking and 2008 milk analysis report data for the Czech Republic were used. All physical and chemical characteristics of the study samples were within the established limits

Our aim was to assess the effect of pasteurization temperature on inactivation of staphylococcal enterotoxins (SE). Milk samples were inoculated with log 4.38 to 5.18cfu/mL of 40 different Staphylococcus aureus strains having the ability to produce types A, B, or C SE and incubated at 37°C for 24h to develop SE. This incubation was followed by heat treatment for 15 s at 72, 85, and 92°C. Samples were analyzed for Staph. aureus count by plate method and, specifically, for SE presence. An enzyme-linked immunofluorescent assay on a MiniVIDAS analyzer (bioMérieux, Marcy l'Étoile, France) was used to detect SE, which were determined semiquantitatively based on test values. The Staph. aureus count in milk before pasteurization did not affect the amount of SE. Before pasteurization, SEB was detected in the lowest amount compared with other SE types. Staphylococcal enterotoxins were markedly reduced with pasteurization and inactivated at pasteurization temperatures to an extent depending on the amount in the sample before pasteurization. After pasteurization at 72°C, SE were detected in 87.5% of samples (35/40), after pasteurization at 85°C in 52.5% of samples (21/40), and after pasteurization at 92°C in 45.0% of samples (18/40). We determined that SE may still persist in milk even when Staph. aureus bacteria are inactivated through pasteurization. Although pasteurization may partially inactivate SE in milk, a key measure in the prevention of staphylococcal enterotoxicosis linked to pasteurized milk consumption is to avoid any cold chain disruption during milk production and processing.

Intoxication by staphylococcal enterotoxins (SE) is among the most common causes of food-poisoning outbreaks resulting from the consumption of raw milk or products made thereof. The aim of our study was to analyze the thermal stability of SE and evaluate the inactivation of SE types A, B, and C (SEA, SEB, SEC) by autoclaving at 100°C, 110°C, and 121°C. Milk samples were inoculated with 38 Staphylococcus aureus strains that possessed the ability to produce SEA, SEB, or SEC and incubated at 37°C for 24 h. This incubation was followed by heat treatment at 100°C, 110°C, or 121°C for 3 min. Samples were analyzed by Staph. aureus plate count method on Baird-Parker agar and specifically for the presence of SE. An enzyme-linked immunofluorescent assay (ELFA) on a MiniVIDAS analyzer (bioMérieux, Marcy l'Étoile, France) was used to detect SE, which were determined semi-quantitatively based on test values. The obtained results were analyzed by means of nonparametric statistical methods. All samples (100%; 38/38) were SE-positive before heat treatment, and the positivity rates decreased after heat treatment at 100°C, 110°C, and 121°C to 36.8% (14/38), 34.2% (13/38), and 31.6% (12/38), respectively. The rates of positive samples differed between SEA, SEB, and SEC producers: SEA was detected in the highest amounts both before and after heat treatment. The amount of SE (expressed as test values) decreased significantly after heat treatment. Comparing amounts of SE in positive and negative samples before and after heat treatment, we can conclude that the success of SE inactivation depends on the amount present before heat treatment. The highest amount of SE and the highest rate of SE-positive samples after all heat treatments were found in samples with strains producing SEA. For SEB and SEC, lower amounts of enterotoxin were present and were inactivated at 100°C. Although temperatures of 100°C, 110°C, and 121°C may inactivate SE in milk, the key measures in prevention of staphylococcal enterotoxicosis are avoiding initial contamination of milk by Staph. aureus, promoting consumption of heat-treated milk, and preventing disruption of the cold chain during milk production and processing.

No abstract