The required level of safety of machines and mechanisms is achieved through the use of appropriate safety management systems for industrial equipment, including programmable electronic ones. Such systems usually include a variety of security devices for managing industrial equipment settings. Since electronic control systems are currently considered the most promising control systems in this area, the study of the security parameters of their application support determines the relevance of this study. This study analyses the main requirements of IEC 61508 and IEC 62061 standards for compliance with modern safety requirements of embedded and applied software for electronic control systems of machines and mechanisms. This study proposes an algorithm for step-by-step implementation of software for electronic machine control systems in accordance with basic security standards for both built-in and application software. Testing has been determined as the main method of verification of application software. Based on the results of the analysis, it was found that the specification of security requirements, both built-in and application software, should highlight the necessary characteristics of each subsystem, providing information that allows choosing the equipment that meets existing security requirements. Relevant recommendations are given on the specifics of practical application of these standards.

This paper examines the environmental conditions at the premises of printed circuit boards (PCBs) manufacturers, which have electroplating plants. It provides a brief overview of the key aspects of adverse environmental impacts of wastes generated by PCB manufacture and electroplating plants. The aim of this research was to improve the test method for evaluation of wastewater effect on the soil salinity at the premises of PCBs manufacturers. The object of research was the process of extraction and use of copper from wastewater generated by PCBs manufacture and electroplating. As an example, the process of sludge formation during PCBs etching has been reviewed. With the etching line capacity of 14 m2/h, one-shift manufacturing process will result in the production of up to 2,500 kg of sludge monthly. For enterprises with capacities of 2,000–4,000 m2 circuits, this means annual accumulation at their premises of up to 70 tons of wastes in the form of sludge. Estimates suggest that the upper half-meter layer of the aeration zone will be qualified as slightly saline in one year after accumulation of the sludge. In subsequent years, the salt content will increase and saline soil can be found at the depths of 1.5–2 m over ten years of storage. The authors of this paper propose to treat spent etching solutions applying regeneration technology in order to reduce the amount of sludge. With this technology, it is possible to use the extracted metal as a secondary raw material for copper production and re-use the regenerated solution in PCBs etching. This paper provides estimated hazard indices calculated for the storage of sludge at the manufacturer’s premises before and after the implementation of the proposed technology. With regards to findings of the study, it has been proposed to reuse copper recovered from wastes as a raw material for the industry.

Purpose: Studying urgent problems in the OSH management field in the in European countries to create effective information and analytical support for the OSH management system. Design/methodology/approach: An analytical review of open sources, a comparative analysis of the legislative framework of different countries and logical conclusions based on existing opportunities at the current stage of development of the country were used to study current problems in the field of labour protection management and find ways to create effective information and analytical support. Improved IS "Vizit" was tested for 2018-2019: to identify undeclared labour, the dynamics of various types of labour violations has been studied; to predict the load of inspectors, the quarterly dynamics of inspection actions was studied; the accumulated statistics were processed using multiple regressions; for 22 enterprises, employees of all levels were remotely trained in labour protection issues. Findings: Information and analytical support for the OSH management system has been developed. On the basis of indirect signs it allows to identify undeclared work cases, to predict the labour inspectors’ inspection activities by quarters, to provide effective distance learning of enterprise employees and labour inspectors. The distance learning system for labour protection was tested at 22 enterprises: the head of the enterprise, the heads of departments and employees of the enterprise passed the training. Since 2018 (start to use of this information and analytical support), the dynamics of inspection actions and various types of labour violations have been monitored. Research limitations/implications: Information and analytical support was tested on the example of Ukrainian labour legislation. However, it can be adapted to the legislation of another country. Practical implications: The proposed information and analytical support using indirect evidences provides an opportunity to identify undeclared work and that significantly reduces the inspection visits number in order to monitor and detect violations of the law; makes it possible to predict the inspection activities and the workload of labour inspectors; contributes to the organizations managers and employees’ effective training, and the inspectors training remotely (and therefore is less costly). Originality/value: A non-standard approach to the identification of undeclared work on indirect grounds using information and analytical support for the OSH management system is proposed.

The relevance of the study presented is conditioned upon the fact that the current national policy of control and supervision, including industrial safety, is designed to detect and prevent violations of the permissible level of danger for people and the environment by entities engaged in economic activities. The purpose of this study is to analyse occupational risks in enterprises and to explore new approaches, methodologies and ways of improving the assessment of occupational risks in production facilities. The methodological foundation of the study is based on a combination of various general scientific methods of scientific knowledge: analysis and synthesis of information, comparative method, and methods of induction and deduction. Improving the state of occupational safety requires improving the principles of occupational safety management. In addition, an assessment of the risk to the life or health of employees from economic activity should be performed and defined as the product of the probability of one accident per year and the probable number of lost working days per employee during the year. The study identified that workplace risk assessment should be re-evaluated whenever changes are expected in the company that may affect safety, such as new processes, new equipment, new materials, or changes in the work organisation or the work environment. The steps of risk assessment are clarified, the means of eliminating or reducing the risk are identified. It was demonstrated that a risk assessment should be developed and used to help employers or managers, and it was emphasised that once risks and dangers have been identified, appropriate action should be implemented with proper legal compliance. The practical significance of the presented research is that it can be used both in practice and for studying the theory of occupational risk assessment at enterprises.

No abstract