Epitaxial c-axis oriented BiFeO3 (BFO) thin films were deposited on (001) Nb-doped SrTiO3 (Nb-STO) substrates by pulsed laser deposition. Introducing Bi vacancies caused the BFO thin film to evolve to a p-type semiconductor and formed a p-n heterojunction with an n-type semiconductor Nb-STO. The current density versus voltage (J-V) and capacitance versus voltage (C-V) characteristics of the heterojunction were investigated. A typical rectifying J-V effect was observed with a large rectifying ratio of 5×104. Reverse C-V characteristics exhibited a linear 1∕C2 versus V plot, from which a built-in potential of 0.6V was deduced. The results show a potential application of BFO/Nb-STO heterojunction for oxide electronics.

We have studied the effect of tensile strain on the superconductivity in FeSe films. 50 nm, 100 nm, and 200 nm FeSe films were grown on MgO, SrTiO$_3$, and LaAlO$_3$ substrates by using a pulsed laser deposition technique. X-ray diffraction analysis showed that the tetragonal phase is dominant in all of our FeSe films. The 50 nm FeSe films on MgO and SrTiO$_3$ are under tensile strain, while the 50 nm FeSe film on LaAlO$_3$ and the other thick FeSe films are unstrained. Superconducting transitions have been observed in unstrained FeSe films with T$_{onset}$ $\approx$ 8 K, which is close to the bulk value. However, no sign of superconductivity has been observed in FeSe films under tensile strain down to 5 K. There is evidence to show that tensile strain suppresses superconductivity in FeSe films

Epitaxial c-axis oriented BiFeO3 (BFO) thin films were deposited on conductive SrRuO3 (SRO) on (001) SrTiO3 substrates by pulsed laser deposition. A Pt/BFO/SRO capacitor was constructed by depositing a top Pt electrode. The leakage current density versus. electric field characteristics were investigated from 80to350K. It was found that the leakage mechanisms were a strong function of temperature and voltage polarity. At temperatures between 80 and 150K, space-charge-limited current was the dominant leakage mechanism for both negative and positive biases. On the other hand, at temperatures between 200 and 350K the dominant leakage mechanisms were Poole-Frenkle emission and Fowler-Nordheim tunneling for negative and positive biases, respectively.

Here we report a modular strategy for preparing physically cross-linked and mechanically robust free-standing hydrogels comprising unique thermotropic liquid crystalline (LC) domains and magnetic nanoparticles both of which serve as the physical cross-linkers resulting in hydrogels that can be used as magnetically responsive soft actuators. A series of amphiphilic LC pentablock copolymers of poly(acrylic acid) (PAA), poly(5-cholesteryloxypentyl methacrylate) (PC5MA), and poly(ethylene oxide) (PEO) blocks in the sequence of PAA-PC5MA-PEO-PC5MA-PAA were prepared using reversible addition-fragmentation chain transfer polymerization. These pentablock copolymers served as macromolecular ligands to template Fe(3)O(4) magnetic nanoparticles (MNPs), which were directly anchored to the polymer chains through the coordination bonds with the carboxyl groups of PAA blocks. The resulting polymer/MNP nanocomposites comprised a complicated hierarchical structure in which polymer-coated MNP clusters were dispersed in a microsegregated pentablock copolymer matrix that further contained LC ordering. Upon swelling, the hierarchical structure was disrupted and converted to a network structure, in which MNP clusters were anchored to the polymer chains and LC domains stayed intact to connect solvated PEO and PAA blocks, leading to a free-standing LC magnetic hydrogel (LC ferrogel). By varying the PAA weight fraction (f(AA)) in the pentablock copolymers, the swelling degrees (Q) of the resulting LC ferrogels were tailored. Rheological experiments showed that these physically cross-linked free-standing LC ferrogels exhibit good mechanical strength with storage moduli G' of around 10(4)-10(5) Pa, similar to that of natural tissues. Furthermore, application of a magnetic field induced bending actuation of the LC ferrogels. Therefore, these physically cross-linked and mechanically robust LC ferrogels can be used as soft actuators and artificial muscles. Moreover, this design strategy is a versatile platform for incorporation of different types of nanoparticles (metallic, inorganic, biological, etc.) into multifunctional amphiphilic block copolymers, resulting in unique free-standing hybrid hydrogels of good mechanical strength and integrity with tailored properties and end applications.

No abstract