Flextensional actuators assembled in association with piezoceramics feature the amplification of nanometric displacements generated by the ceramics energy conversion. For applications that require high precision positioning or vibration response attenuation, such as hard disc reading or atomic force microscopy, a response tracking control needs to be implemented. Shell and plate piezoactuators with vibration control have been extensively studied in literature, however the design of controlled piezoelectric systems by means of the Topology Optimization Method (TOM) has not been fully explored in literature yet, and is generally focused on the frequency domain transient analysis, which employs a model reduction method for the sake of computational implementation. Dealing with transient analysis of flextensional piezoelectric actuators, an active closed loop control design is more suited for the positioning and vibration problem, which consists on measuring the outputs of the system by the closed loop sensor layer, whose signal is modified by a control gain and eventually inputted into the actuator layer so the system response signal is modulated. Aiming to enhance the active feedback control in piezoelectric actuators (PEAs), this work targets the design of the flextensional microstructure considering an active velocity feedback control (AVFC), where the active piezoelectric sensing and actuating cycles imply in an extra damping to the system. Therefore, the flextensional mechanism compliance shall be distributed within the design domain by the allocation of void regions where there should be the flexible hinges. Such a design can be accomplished by means of the TOM, which employs a systematic analysis of the dynamic model through the finite element method (FEM). In this work, the finite element (FE) system model takes into account the piezoelectric ceramics intermediate nodes, what is denominated as non-collapsed piezoelectric nodes model, and whose induced voltage during the time domain dynamic response contributes to the active control of the system. The topology optimization (TO) problem is formulated for the system vibration suppression at the restoring position and at the actuated position (positioner) subject to material volume and design variables constraints. The TOM implemented is based on the solid isotropic material with penalization (SIMP), the dynamic adjoint sensitivity, and on the optimization solver known as sequential linear programming (SLP). To illustrate the method, bidimensional examples of optimized topologies are numerically obtained by employing different velocity feedback control gains, and the topologies efficiency are compared and contrasted.

In recent years, the new technologies and discoveries on manufacturing materials have encouraged researchers to investigate the appearance of material properties that are not naturally available. Materials featuring a specific stiffness, or structures that combine non-structural and structural functions are applied in the aerospace, electronics and medical industry fields. Particularly, structures designed for dynamic actuation with reduced vibration response are the focus of this work. The bi-material and multifunctional concepts are considered for the design of a controlled piezoelectric actuator with vibration suppression by means of the topology optimization method (TOM). The bi-material piezoelectric actuator (BPEA) has its metallic host layer designed by the TOM, which defines the structural function, and the electric function is given by two piezo-ceramic layers that act as a sensor and an actuator coupled with a constant gain active velocity feedback control (AVFC). The AVFC, provided by the piezoelectric layers, affects the structural damping of the system through the velocity state variables readings in time domain. The dynamic equation analyzed throughout the optimization procedure is fully elaborated and implemented. The dynamic response for the rectangular four-noded finite element analysis is obtained by the Newmark's time-integration method, which is applied to the physical and the adjoint systems, given that the adjoint formulation is needed for the sensitivity analysis. A gradient-based optimization method is applied to minimize the displacement energy output measured at a predefined degree-of-freedom of the BPEA when a transient mechanical load is applied. Results are obtained for different control gain values to evaluate their influence on the final topology.

Método da Otimização Topológica. Atuador piezoelétrico flextensional. Controle ativo. Análise transiente no domínio do tempo. Nós piezoelétricos não-colapsados.

No abstract

No abstract