The ability of large grain, REBa2Cu3O7- [(RE)BCO; RE = rare earth] bulk superconductors to trap magnetic field is determined by their critical current. With high trapped fields, however, bulk samples are subject to a relatively large Lorentz force, and their performance is limited primarily by their tensile strength. Consequently, sample reinforcement is the key to performance improvement in these technologically important materials. In this work, we report a trapped field of 17.6 T, the largest reported to date, in a stack of two, silver-doped GdBCO superconducting bulk samples, each of diameter 25 mm, fabricated by top-seeded melt growth (TSMG) and reinforced with shrink-fit stainless steel. This sample preparation technique has the advantage of being relatively straightforward and inexpensive to implement and offers the prospect of easy access to portable, high magnetic fields without any requirement for a sustaining current source.

This paper presents a topical review of the current state of the art in modelling the magnetization of bulk superconductors, including both (RE)BCO (where RE = rare earth or Y) and MgB 2 materials. Such modelling is a powerful tool to understand the physical mechanisms of their magnetization, to assist in interpretation of experimental results, and to predict the performance of practical bulk superconductor-based devices, which is particularly important as many superconducting applications head towards the commercialisation stage of their development in the coming years. In addition to the analytical and numerical techniques currently used by researchers for modelling such materials, the commonly used practical techniques to magnetize bulk superconductors are summarised with a particular focus on pulsed field magnetization (PFM), which is promising as a compact, mobile and relatively inexpensive magnetizing technique. A number of numerical models developed to analyse the issues related to PFM and optimise the technique are described in detail, including understanding the dynamics of the magnetic flux penetration and the influence of material inhomogeneities, thermal properties, pulse duration, magnitude and shape, and the shape of the magnetization coil(s). The effect of externally applied magnetic fields in different configurations on the attenuation of the trapped field is also discussed. A number of novel and hybrid bulk superconductor structures are described, including improved thermal conductivity structures and ferromagnet-superconductor structures, which have been designed to overcome some of the issues related to bulk superconductors and their magnetization and enhance the intrinsic properties of bulk superconductors acting as trapped field magnets (TFMs). Finally, the use of hollow bulk cylinders/tubes for shielding is analysed.

The ability to generate a permanent, stable magnetic field unsupported by an electromotive force is fundamental to a variety of engineering applications. Bulk high temperature superconducting (HTS) materials can trap magnetic fields of magnitude over ten times higher than the maximum field produced by conventional magnets, which is limited practically to rather less than 2 T. In this paper, two large c-axis oriented, single-grain YBCO and GdBCO bulk superconductors are magnetised by the pulsed field magnetisation (PFM) technique at temperatures of 40 and 65 K and the characteristics of the resulting trapped field profile are investigated with a view of magnetising such samples as trapped field magnets (TFMs) in-situ inside a trapped flux-type superconducting electric machine. A comparison is made between the temperatures at which the pulsed magnetic field is applied and the results have strong implications for the optimum operating temperature for TFMs in trapped fluxtype superconducting electric machines. The effects of inhomogeneities, which occur during the growth process of single-grain bulk superconductors, on the trapped field and maximum temperature rise in the sample are modelled numerically using a 3D finite-element model based on the H-formulation and implemented in Comsol Multiphysics 4.3a. The results agree qualitatively with the observed experimental results, in that inhomogeneities act to distort the trapped field profile and reduce the magnitude of the trapped field due to localised heating within the sample and preferential movement and pinning of flux lines around the growth section regions (GSRs) and growth sector boundaries (GSBs), respectively. The modelling framework will allow further investigation of various inhomogeneities that arise during the processing of (RE)BCO bulk superconductors, including inhomogeneous J c distributions and the presence of current-limiting grain boundaries and cracks, and it can be used to assist optimisation of processing and PFM techniques for practical bulk superconductor applications.

Progress in superconducting bulk materials has been somewhat overshadowed by the considerable effort required to produce practical long-length conductors. There has, however, been steady progress in both the materials science of bulk superconducting materials and the technologies required to use them effectively in engineering applications. In particular, magnetised bulk superconductors are capable of acting as quasi-permanent magnets with the potential of providing magnetic fields of several tesla or greater from a small volume of material, they can act as magnetic shields and they can provide self-stabilised levitation. This roadmap, based on a workshop which involved the participation of a wide range of academic and industrial participants (see doi: 10.17863/CAM.586 for details of the workshop methodology), aims to explore some of the key potential domains of application of bulk superconductors. Detailed technological roadmaps are presented for four key applications that were identified as providing both good market opportunity and feasibility. These are: portable systems for bulk superconductivity; portable, high-field magnet systems for medical devices; ultra-light superconducting rotating machines for next-generation transport & power applications; and magnetic shielding applications for electric machines, equipment and other high-field devices.

Despite their proven ability to output DC currents of >100 A, the physical mechanism which underpins the operation of a high-T c superconducting (HTS) dynamo is still widely debated. Here, we show that the experimentally observed open-circuit DC output voltage, V dc , is due to the action of overcritical eddy currents within the stator wire. We demonstrate close agreement between experimental results and numerical calculations, and show that large over-critical currents flow within the high-T c stator during certain parts of the dynamo cycle. These overcritical currents experience a non-linear local resistivity which alters the output voltage waveform obtained in the superconducting state. As a result, the full-cycle integral of this altered waveform outputs a non-zero time-averaged dc voltage. We further show that the only necessary requirement for a non-zero V dc output from any dynamo, is that the stator must possess a non-linear local resistivity. Here, this is provided by the flux-flow regime of a HTS coated conductor wire, where conduction is described by the E − J power law. We also show that increased values of V dc can be obtained by employing stator wires which exhibit a strong in-field dependence of the critical current J c (B, θ). However, non-linear resistivity is the key requirement to realize a DC output, as linear magneto-resistance is not sufficient. Our results clarify this longstanding conundrum, and have direct implications for the optimization of future HTS dynamo devices.