Novel computing technologies that imitate the principles of biological neural systems may offer low power consumption along with distinct cognitive and learning advantages. The development of reliable memristive devices capable of storing multiple states of information has opened up new applications such as neuromorphic circuits and adaptive systems. At the same time, the explosive growth of the printed electronics industry has expedited the search for advanced memory materials suitable for manufacturing flexible devices. Here, we demonstrate that solution-processed MoOx/MoS2 and WOx/WS2 heterostructures sandwiched between two printed silver electrodes exhibit an unprecedentedly large and tunable electrical resistance range from 10(2) to 10(8) Ω combined with low programming voltages of 0.1-0.2 V. The bipolar resistive switching, with a concurrent capacitive contribution, is governed by an ultrathin (<3 nm) oxide layer. With strong nonlinearity in switching dynamics, different mechanisms of synaptic plasticity are implemented by applying a sequence of electrical pulses.

A method for sintering nanoparticles by applying voltage is presented. This electrical sintering method is demonstrated using silver nanoparticle structures ink-jet-printed onto temperature-sensitive photopaper. The conductivity of the printed nanoparticle layer increases by more than five orders of magnitude during the sintering process, with the final conductivity reaching 3.7 × 10(7) S m(-1) at best. Due to a strong positive feedback induced by the voltage boundary condition, the process is very rapid-the major transition occurs within 2 µs. The best obtained conductivity is two orders of magnitude better than for the equivalent structures oven-sintered at the maximum tolerable temperature of the substrate. Additional key advantages of the method include the feasibility for patterning, systematic control of the final conductivity and in situ process monitoring. The method offers a generic tool for electrical functionalization of nanoparticle structures.

No abstract

Room temperature substrate-facilitated sintering of nanoparticles is demonstrated using commercially available silver nanoparticle ink and inkjet printing substrates. The sintering mechanism is based on the chemical removal of the nanoparticle stabilizing ligand and is shown to provide conductivity above one-fourth that of bulk silver. A novel approach to attach discrete components to printed conductors is presented, where the sintered silver provides the metallic interconnects with good electrical and mechanical properties. A process for printing and chip-on-demand assembly is suggested.