No abstract

During chlorination of bromide-containing waters, a significant formation of brominated disinfection byproducts is expected. This is of concern because Br-DBPs are generally more toxic than their chlorinated analogues. In this study, synthetic water samples containing dissolved organic matter (DOM) extracts and bromide were treated under various disinfection scenarios to elucidate the mechanisms of Br-DBP formation. The total concentration of Br-DBPs was measured as adsorbable organic bromine (AOBr). A portion of the bromine (HOBr) was found to react with DOM via electrophilic substitution (≤40%), forming AOBr, and the remaining HOBr reacted with DOM via electron transfer with a reduction of HOBr to bromide (≥60%). During chlorination, the released bromide is reoxidized (recycled) by chlorine to HOBr, leading to further electrophilic substitution of unaltered DOM sites and chlorinated DOM moieties. This leads to an almost complete bromine incorporation to DOM (≥87%). The type of DOM (3.06 ≤ SUVA ≤ 4.85) is not affecting this process, as long as the bromine-reactive DOM sites are in excess and a sufficient chlorine exposure is achieved. When most reactive sites were consumed by chlorine, Cl-substituted functional groups (Cl-DOM) are reacting with HOBr by direct bromination leading to Br-Cl-DOM and by bromine substitution of chlorine leading to Br-DOM. The latter finding was supported by hexachlorobenzene as a model compound from which bromoform was formed during HOBr treatment. To better understand the experimental findings, a conceptual kinetic model allowing to assess the contribution of each AOBr pathway was developed. A simulation of distribution system conditions with a disinfectant residual of 1 mgC L showed complete conversion of Br to AOBr, with about 10% of the AOBr formed through chlorine substitution by bromine.

Determination of halogen-specific total organic halogen (TOX) is vital for studies of disinfection of waters containing bromide, since total organic bromine (TOBr) is likely to be more problematic than total organic chlorine. Here, we present further halogen-specific TOX method optimisation and validation, focusing on measurement of TOBr. The optimised halogen-specific TOX method was validated based on the recovery of model compounds covering different classes of disinfection by-products (haloacetic acids, haloacetonitriles, halophenols and halogenated benzenes) and the recovery of total bromine (mass balance of TOBr and bromide concentrations) during disinfection of waters containing dissolved organic matter and bromide. The validation of a halogen-specific TOX method based on the mass balance of total bromine has not previously been reported. Very good recoveries of organic halogen from all model compounds were obtained, indicating high or complete conversion of all organic halogen in the model compound solution through to halide in the absorber solution for ion chromatography analysis. The method was also successfully applied to monitor conversion of bromide to TOBr in a groundwater treatment plant. An excellent recovery (101%) of total bromine was observed from the raw water to the post-chlorination stage. Excellent recoveries of total bromine (92%-95%) were also obtained from chlorination of a synthetic water containing dissolved organic matter and bromide, demonstrating the validity of the halogen-specific TOX method for TOBr measurement. The halogen-specific TOX method is an important tool to monitor and better understand the formation of halogenated organic compounds, in particular brominated organic compounds, in drinking water systems.