No abstract

Implantable medical devices are becoming smaller and more deeply implanted in the human body for various applications (i.e., neurostimulation, drug delivery, bone fracture monitoring). Therefore, an efficient ultrasound power transfer link is needed to charge these devices. However, this is challenging because each ultrasound transducer has limited angular sensitivity. This work proposes a low-power telemetry protocol that can reliably feedback the power sent to the implant with backscattered ultrasound. The protocol works by sending two consecutive interrogation signals and connecting a circuit on the receiver that modulates only one of the two signals. The modulated signal can be decoded with an external ultrasound probe. In this work, the circuit was built, verified, and compared with simulation results. It was shown that the telemetry protocol could accurately localize the receiving ultrasound element at sub-mm precision at a 10 cm depth.

Background Microelectrode arrays (MEA) enable the measurement and stimulation of the electrical activity of cultured cells. The integration of other neuromodulation methods will significantly enhance the application range of MEAs to study their effects on neurons. A neuromodulation method that is recently gaining more attention is focused ultrasound neuromodulation (FUS), which has the potential to treat neurological disorders reversibly and precisely. Methods In this work, we present the integration of a focused ultrasound delivery system with a multiwell MEA plate. Results The ultrasound delivery system was characterised by ultrasound pressure measurements, and the integration with the MEA plate was modelled with finite-element simulations of acoustic field parameters. The results of the simulations were validated with experimental visualisation of the ultrasound field with Schlieren imaging. In addition, the system was tested on a murine primary hippocampal neuron culture, showing that ultrasound can influence the activity of the neurons. Conclusions Our system was demonstrated to be suitable for studying the effect of focused ultrasound on neuronal cultures. The system allows reproducible experiments across the wells due to its robustness and simplicity of operation.

The main limitation of acoustic particle separation for microfluidic application is its low sorting efficiency. This is due to the weak coupling of surface acoustic waves (SAWs) into the microchannel. In this work, we demonstrate bulk acoustic wave (BAW) particle sorting using capacitive micromachined ultrasonic transducers (CMUTs) for the first time.A collapsed mode CMUT was driven in air to generate acoustic pressure within the silicon substrate in the in-plane direction of the silicon die. This acoustic pressure was coupled into a water droplet, positioned at the side of the CMUT die, and measured with an optical hydrophone. By using a beam steering approach, the ultrasound generated from 32 CMUT elements were added in-phase to generate a maximum peak-to-peak pressure of 0.9 MPa. Using this pressure, 10 µm latex beads were sorted almost instantaneously.

Recently, focused ultrasound has been proposed to power deeply implanted medical devices. Almost exclusively, lead zirconate titanate (PZT) transducers are used to convert acoustic energy into electrical energy. Unfortunately, these lead containing devices cannot be hermetically encapsulated since that would block the ultrasound. We propose the use of biocompatible Capacitive Micromachined Ultrasonic Transducer (CMUT) elements to replace traditional PZT transducers. In addition, to eliminate the external bias voltage, we introduced a charge trapping Al2O3 layer inside the CMUT to create a built-in bias voltage. These devices can be pre-charged and used as a receiver for US power. In this work, the viability of charged CMUTs to power deep implants was explored by investigating the effect of the charging parameters and by performing Accelerated Lifetime Tests (ALT). The estimated lifetime at body temperature ranges between 2.5 to 3.5 years at body temperature, which significantly depends on the charging parameters. Keywords-capacitive micromachined ultrasound transducers, pre-charged CMUT, zero-bias transducers, ultrasound power transfer, accelerated lifetime test